Analysis and optimization of control cam mechanism in a roller-type corn finger planter based on DEM and MBD coupling technology

Tinghao Deng, Wuyun Zhao, Linrong Shi, Bugong Sun, Tianshan Qi, Hui Li

Abstract


The application of plastic mulch in the arid regions of northwest China has demonstrated significant advantages, making roller-type hole sowing on mulch a key agricultural trend. In order to enhance the performance of a roller-type corn finger planter equipped with finger pickups. This study analyzed the motion patterns of corn seeds within the device and investigated the effects of control cam parameters, including pickup section, vibration section, pickup stroke angle, and torsion spring force, on seed-metering performance. Using DEM-MBD coupling technology, single-factor experiments and second-order orthogonal rotational combination simulation experiments were conducted. The optimal parameter is that pickup section stroke angle is 78.98°, vibration section stroke angle is 20.07°, and a normal force is 2.99 N, which was validated through bench tests, achieving a seed-metering qualification rate of 93.86%, a missed seeding rate of 3.19%, and a reseeding rate of 2.95%. These results met the standards and agronomic requirements, demonstrating the effectiveness of the proposed optimization method. It provides a foundation for improving the precision and reliability of roller-type corn seed-metering devices.
Keywords: corn, roller-type corn finger planter, control cam, DEM-MBD, coupling simulation
DOI: 10.25165/j.ijabe.20251801.9322

Citation: Deng T H, Zhao W Y, Shi L R, Sun B G, Qi T S, Li H. Analysis and optimization of control cam mechanism in a roller-type corn finger planter based on DEM and MBD coupling technology. Int J Agric & Biol Eng, 2025; 18(1): 143–153.

Keywords


corn, roller-type corn finger planter, control cam, DEM-MBD, coupling simulation

Full Text:

PDF

References


Liu Q W, Cui T, Zhang D X, Yang L, Wang Y X, He X T, et al. Design and experimental study of seed precise delivery mechanism for high-speed maize planter. Int J Agric & Biol Eng, 2018; 11(4): 81–87.

National statistical office. Announcement by the national statistical office on grain production data for 2023. 2023. Available: https://www.gov.cn/lianbo/bumen/202312/content_6919545.htm. Accessed on [2024-04-25].

Huang Z F, Xue J, Ming B, Wang K R, Xie R Z, Hou P, et al. Analysis of factors affecting the impurity rate of mechanically-harvested maize grain in China. Int J Agric & Biol Eng, 2020; 13(5): 17–22.

Li Y H, Yang L, Zhang D X, Cui T, Zhang K L, Xie C J, et al. Analysis and test of linear seeding process of Corn high speed precision metering device with air suction. Transactions of the CSAE, 2020; 36(9): 26–35. (in Chinese)

Dong J X, Zhang S L, Zheng Z Z, Wu H T, Huang Y X, Gao X J Development of a novel perforated type precision metering device for efficient and cleaner production of maize. Journal of Cleaner Production, 443(2024): 140928.

Yang L, Yan B X, Zhang D X, Zhang T L, Wang Y X, Cui T. Research progress on precision planting technology of corn. Transactions of the CSAM, 2016; 47(11): 38–48. (in Chinese)

Wang J W, Tang H, Wang J F, Shen H G, Feng X, Wang H N. Analysis and experiment of guiding and dropping migratory mechanism on pickup dropping migratory mechanism on pickup. Transactions of the CSAM, 2017; 48(1): 29–37,46. (in Chinese)

Dai F, Zhao Y M, Liu Y X, Shi R J, Xin S L, Fu Q F, et al. Analysis and performance test on dynamic seed corn threshing and conveying process with variable diameter and spacing. Int J Agric & Biol Eng, 2023; 16(2): 259–266.

Shi L R, Zhao W Y, Hua C T, Rao G, Wang Z. Study on the intercropping mechanism and seeding improvement of the cavity planter with vertical insertion using DEM-MBD coupling method. Agriculture, 2022; 12: 1567.

Li H, Zhao W Y, Shi L R, Dai F, Rao G, Wang Z. Design and test of seed ladle tongue type flax precision burrow planter. Transactions of the CSAM, 2024; 55(3): 85–95. (in Chinese)

Zhang C Y, Kang J M, Peng Q J, Zhang N N, Wang X Y, Jian S C. Design and test of secondary seed feeding mechanism of air-suction roller dibbler for cotton. Transactions of the CSAM, 2021; 52(6): 106–116. (in Chinese)

Zhang X J, Cheng J P, Shi Z L, Wang J M, Fu H, Wu H F. Simulation and experiment of seed taking performance of swing-clamp type corn precision seed-metering device. Transactions of the CSAM, 2023; 54(4): 38–50. (in Chinese)

Li C, Cui T, Zhang D X, Yang L, He X T, Jing M S, et al. Design shaped hole inserts by simulating and analysing the high-speed filling posture of maize seed particles. ScienceDirect, 2023; 232: 29–50.

Lu B, Ni X D, Li K Z, Li S F, Qi Q Z, Shao W P. Simulation analysis and experiment of seed discharge performance of high-speed hole seeder based on EDEM. Journal of Chinese Agricultural Mechanization, 2024; 45(2): 49–54. (in Chinese) DOI: 10.13733/j.jcam.issn.2095 5553.2024.02.008

Shi L R, Zhao W Y, Rao G, Wang Z. Modeling of typically shaped corn seeds and calibration of the coefficient of rolling friction. Agronomy, 2023; 13: 1573.

Takayama T. vickers hardness mechanical models and thermoplastic polymer injection-molded products’ static friction coefficients. Manufacturing and Materials Processing, 2024; 8(1): 11;

Shi L R, Zhao W Y, Sun W, Yang X P, Wang G P, Xin S L. Analysis of the metering performance for typical shapemaize seeds using DEM. Int J Agric & Biol Eng, 2023; 16(1): 26–35.

Horabik J, Molenda M. Parameters and contact models for DEM simulations of agricultural granular materials. Biosystems Engineering, 2016; 147: 206–225.

Wang L J, Zhou W X, Ding Z J, Li X X, Zhang C G. Experimental determination of parameter effects on the coefficient of restitution of differently shaped corn in three-dimensions. Powder Technol, 2015; 284: 187–194.

Markauskas D, Ramírez-Gómez Á, Kačianauskas R, Zdancevičius E. Corn grain shape approaches for DEM modelling. Compute. Electron. Agric., 2015; 118: 247–258.

Sun Y H, Guo J H, Shi L R. Design and parameter optimization of air-suction wheel type of seed-metering device with elastic pad for maize. Int J Agric & Biol Eng, 2024; 17(4): 116–127.

Wang J W, Tang H, Guan R, Li X, Bai H C, Tian L Q. Optimization design and experiment on clamping static and dynamic finger-spoon maize precision seed metering device. Transactions of the CSAM, 2017; 48(12): 48–57. (in Chinese)

National Technical Committee for the Standardisation of Agricultural Machinery. Test method for single grain (precision) planter: GB/6973-2005. Beijing: China Standard Press. 2006. (in Chinese)




Copyright (c) 2025 International Journal of Agricultural and Biological Engineering

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

2023-2026 Copyright IJABE Editing and Publishing Office