Evaluating the effects of subsoiler type and spacing on tillage resistance and soil conservation with DEM simulation and field experiment

Yueming Wang, Chenjie Lu, Jiajun Fan, Xu Zhang, Kai Chen, Jing Chen, Xiaoguang Li

Abstract


Multi-subsoiler collaboration plays a significant role in improving the efficiency of subsoiling. High tillage resistance during subsoiling seriously affects consumption, and the excessive soil disturbance may result in an increase in the amount of water that evaporates from the soil, which is unfavorable for water conservation. However, the space arrangement and types of subsoiler are key parameters for design of a set of subsoilers and have a major effect on tillage resistance and soil disturbance, which is a critical performance indicator of subsoiling. In this paper, a set of subsoiler models were developed using DEM. A field experiment was conducted in the sowing season in an experimental field of 1 hm2 with black soil of Juliangtun Village, Liaoning Province. In both the simulation and experiment, six types of subsoilers (TC-SM, TC-SC, TA-SM, TA-SC, TDW-SM, and TDW-SC) were investigated at three different spacing arrangements (500, 600, and 700 mm), a constant vertical distance between the front and back subsoilers (500 mm), a constant working speed (3 km/h), and a constant working depth (400 mm). The mechanism of resistance was analyzed. The results showed that the tillage resistances of the six types of subsoilers were in the descending order of FTDW-SC>FTA-SC>FTC-SC>FTDW-SM>FTA-SM>FTC-SM. The field test showed that TC-SM with 600 mm spacing produced stable fluctuations with less tillage resistance. The variance analysis and regression equation testing of the experimental results were analyzed to enhance their scientific rigor. The analysis showed that the significances of each factor on the results were in the descending order of shank, space, and tine. The optimal configuration may be with spacing of 600 mm, tine of TC, and shank of SM, which is consistent with the field test and theoretical analysis. Tillage resistance of the DEM simulation was less than that of the field experiment, with an error of less than 10%, due to ignoring the effect of crop roots, straw residue, stones, or blunt tine and shank, which confirms the authenticity of simulation. The effect of spacing on soil disturbance behavior indicates that a mixed soil structure with moderate soil disturbance and soil porosity ratio and a spacing of 600 mm would be a good choice. This study provides an important foundation in selecting spacing for subsoiling to achieve an optimal soil tillage condition.
Keywords: subsoiler, space arrangement, mechanism analysis, tillage resistance, soil disturbance
DOI: 10.25165/j.ijabe.20251801.8996

Citation: Wang Y M, Lu C J, Fan J J, Zhang X, Chen K, Chen J, et al. Evaluating the effects of subsoiler type and spacing on tillage resistance and soil conservation with DEM simulation and field experiment. Int J Agric & Biol Eng, 2025; 18(1): 115–123.

Keywords


subsoiler, space arrangement, mechanism analysis, tillage resistance, soil disturbance

Full Text:

PDF

References


Liu Z, Cao S L, Sun Z H, Wang H Y, Qu S D, Lei N, et al. Tillage effects on soil properties and crop yield after land reclamation. Scientific Reports, 2021; 11(1): 4611.

Araya S N, Mitchell J P, Hopmans J W, Ghezzehei T A. Long-term impact of cover crop and reduced disturbance tillage on soil pore size distribution and soil water storage. Soil, 2022; 8(1): 177–198.

Adil M, Zhang C, Yao Z J, Lu S Q, Qin Z Y, Wang J C, et al. Interactive effects of intercropping and mulching under conservation tillage as sustainable agriculture increased cotton productivity. Frontiers in Ecology and Evolution, 2023; 10: 1092636.

Zabihi R, Mowla D, Karami H R. Artificial intelligence approach to predict drag reduction in crude oil pipelines. Journal of Petroleum Science and Engineering, 2019; 178: 586–593.

Liu J A, Wang X L, Li H W, He J, Wang Q J, Li W Y. Optimization of structural parameters of subsoiler based on soil disturbance and traction resistance. Transactions of the CSAM, 2017; 48(2): 60–67.

Plessis A D, Broeckhoven C, Yadroitsava I, Yadroitsev I, Hands C H, Kunjuet R, et al. Beautiful and functional: a review of biomimetic design in additive manufacturing. Additive Manufacturing, 2019; 27: 408–427.

Plessis A D, Broeckhoven C. Looking deep into nature: a review of micro-computed tomography in biomimicry. Acta Biomaterialia, 2019; 85: 27–40.

Hassanalian M, Abdelmoula H, Mohammadi S, Bakhtiyarov S, Goerlich J, Javedet U, et al. Aquatic animal colors and skin temperature: Biology’s selection for reducing oceanic dolphin’s skin friction drag. Journal of Thermal Biology, 2019; 84: 292–310.

Qin K, Zhao Y, Zhang Y Z, Cao C M, Shen Z G. Lateral stress and its transmission law caused by operation of a double-wing subsoiler in sandy loam soil. Frontiers in Environmental Science, 2022; 10: 986361.

Wang Y M, Lu C J, Chen J, Cui C H, Pan Y J, Pfleging W, et al. Effects of self-healing biomimetic subsoiler on tillage resistance, wear-corrosion performance and soil disturbance morphology under different soil types. Int J Agric & Biol Eng, 2023; 16(3): 7–14.

Makange N R, Ji C Y, Nyalala I, Sunusi I I, Opiyo S. Prediction of precise subsoiling based on analytical method, discrete element simulation and experimental data from soil bin. Scientific Reports, 2021; 11: 11082.

Wang Y M, Li N, Ma Y H, Tong J, Pfleging W, Sun J Y. Field experiments evaluating a biomimetic shark-inspired (BioS) subsoiler for tillage resistance reduction. Soil and Tillage Research, 2020; 196: 104432.

Wang Y M, Xue W L, Ma Y H, Tong J, Liu X P, Sun J Y. DEM and soil bin study on a biomimetic disc furrow opener. Computers and Electronics in Agriculture, 2019; 156: 209–216.

Huang Y X, Hang C G, Yuan M C, Wang B T, Zhu R X. Discrete element simulation and experiment on disturbance behavior of subsoiling. Transactions of the CSAM, 2016; 47(7): 80–88.

Wang X Z, Yue B, Gao X J, Zheng Z Q, Zhu R X, Huang Y X. Discrete element simulations and experiments of disturbance behavior as affected by mounting height of subsoiler’s wing. Transactions of the CSAM, 2018; 49(10): 124–136.

Hang C G, Gao X J, Yuan M C, Huang Y X, Zhu R X. Discrete element simulations and experiments of soil disturbance as affected by the tine spacing of subsoiler. Biosystems Engineering, 2018; 168: 73–82.

Shi Y Y, Jiang Y, Wang X C, Yu H M, Liu H, Chen J B. Innovation of strip fertilization planting for rice straw crushing with back-throwing and interrow-laying. Plant Methods, 2022; 18: 31.

Ahmadi I. Effect of soil, machine, and working state parameters on the required draft force of a subsoiler using a theoretical draft-calculating model. Soil Research, 2016; 55(4): 389–400.

Zhang X Y, Zhang L X, Hu X, Wang H, Shi X B. Calibrating contact parameters of typical rotary tillage components cutting soil based on different simulation methods. Scientific Reports, 2023; 13: 5757.

Wang Y J, Wu, Y X, Cao C Y, Hen S, Zhao W S, Li Q S, et al. Effects of fertilizer reduction coupled with straw returning on soil fertility, wheat root endophytic bacteria, and the occurrence of wheat crown rot. Frontiers in Microbiology, 2023; 14: 1143480.




Copyright (c) 2025 International Journal of Agricultural and Biological Engineering

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

2023-2026 Copyright IJABE Editing and Publishing Office