Influence of groove wheel discharger on the discharge pulsation characteristics of agricultural materials

Yu Ru, Daming Xia, Zifan Rong, Xiao Zhang

Abstract


The external groove wheel discharger has good versatility and can adapt well to materials of different particle sizes (seeds or fertilizers). However, the flow pulsation phenomenon during the working process may lead to a decrease in the efficiency of the operation, and thus optimization is needed. In this study, the straight-tooth groove wheel discharger was taken as the research object, and a discrete element model of the discharger in operation was established. The coefficient of variation of the flow pulsation was used as the evaluation index; the effective length of the groove wheel, the groove speed of the groove wheel, the arc length of the inverted tongue chamfer, and the radius of the concave groove were taken as the experimental factors; and a four-factor and five-level orthogonal regression rotation combination simulation experiment was conducted. A mathematical regression model of the coefficient of variation of the discharge pulsation was established to optimize each factor. The results showed that when the effective length of the groove wheel was 45 mm, the groove speed was 54 r/min, the arc length of the discharge tongue chamfer was 19 mm, and the groove radius was 12 mm, the coefficient of variation of the flow pulsation was optimal. The simulation results were consistent with the model predictions. Under the optimized parameters, simulation experiments on the flow pulsation of urea (spherical shape) and rice (ellipsoidal shape) particles were carried out separately. The results showed that under the same structure and working parameters, there were significant differences in the coefficient of variation of the flow pulsation between the two types of particles, with the rice particles having a larger overall coefficient of variation. Within the optimization constraint range of the groove speed, the coefficient of variation of the flow pulsation of rice particles gradually decreased and tended to be stable with the increase of the groove speed, while that of urea particles decreased first and then increased with the increase of the groove speed. After increasing the groove radius, the coefficient of variation of the flow pulsation of rice particles decreased overall, and the pulsation was improved, which was consistent with the results of the platform verification and simulation. Therefore, when using the external groove wheel discharger for different types of agricultural materials, the groove wheel can be replaced according to the different materials to meet the requirement of uniform discharge, which is conducive to the development of precision agriculture and of great significance.
Keywords: groove wheel, agricultural materials, discrete element method (DEM), response surface, optimal design
DOI: 10.25165/j.ijabe.20251801.8431

Citation: Ru Y, Xia D M, Rong Z F, Zhang X. Influence of groove wheel discharger on the discharge pulsation characteristics of agricultural materials. Int J Agric & Biol Eng, 2025; 18(1): 83–91.

Keywords


groove wheel, agricultural materials, discrete element method (DEM), response surface, optimal design

Full Text:

PDF PDF

References


Zhang W F, Cao G X, Li X L, Zhang H Y, Wang C, Liu Q Q, et al. Closing yield gaps in China by empowering smallholder farmers. Nature, 2016; 537: 671–674.

Zhu Q X, Wu G P, Chen L P, Zhao C J, Meng Z J. Influences of structure parameters of straight flute wheel on fertilizing performance of fertilizer apparatus. Transactions of the CSAE, 2018; 34(18): 12–20. (in Chinese)

Xi X B, Gu C J, Shi Y J, Zhao Y, Zhang Y F, Zhang Q, et al. Design and experiment of no-tube seeder for wheat sowing. Soil & Tillage Research, 2020; 204: 104724.

Song C C, Zhou Z Y, Luo X W, Lan Y B, He X G, Ming R, et al. Design and test of centrifugal disc type sowing device for unmanned helicopter. Int J Agric & Biol Eng, 2018; 11(2): 55–61.

Zeng S, Tan Y P, Wang Y, Luo X W, Yao L M, Huang D P, et al. Structural design and parameter determination for fluted-roller fertilizer applicator. Int J Agric & Biol Eng, 2020; 13(2): 101–110.

Shi Y Y, Chen M, Wang X C, Odhiambo M O, Zhang Y N, Ding W M. Analysis and experiment of fertilizing performance for precision fertilizer applicator in rice and wheat fields. Transactions of the CSAM, 2017; 48(7): 97–103.

Coetzee J C. Calibration of the discrete element method and the effect of particle shape. Powder Technology, 2016; 297: 50–70.

Zhao L, Zhou H P, Xu L Y, Song S Y, Zhang C, Yu Q X. Parameter calibration of coconut bran substrate simulation model based on discrete element and response surface methodology. Powder Technology, 2022; 395: 183–194.

Ding S P, Bai L, Yao Y X, Yue B, Fu Z L, Zheng Z Q, et al. Discrete element modelling (DEM) of fertilizer dual-banding with adjustable rates. Computers and Electronics in Agriculture, 2018; 152: 32–39.

Gao X J, Xie G F, Xu Y. Application of a staggered symmetrical spiral groove wheel on a quantitative feeding device and investigation of particle motion characteristics based on DEM. Powder Technology, 2022; 407: 117650.

Gao X J, Zhou Z Y, Xu Y, Yu Y, Su Y, Cui T. Numerical simulation of particle motion characteristics in quantitative seed feeding system. Powder Technology, 2020; 367: 643–658.

Du J, Yang Q J, Xia J F, Li G. Discrete element modeling and verification of an outer groove wheel fertilizer applicator with helical teeth. Transactions of the ASABE, 2020; 63(3): 659–665.

Huang Y X, Wang B T, Yao Y X, Ding S P, Zhang J C, Zhu R X. Parameter optimization of fluted-roller meter using discrete element method. Int J Agric & Biol Eng, 2018; 11(6): 65–72.

Liu W, Hu J P, Zhao X S, Pan H R, Ali Lakhiar I, Wang W. Development and experimental analysis of an intelligent sensor for monitoring seed flow rate based on a seed flow reconstruction technique. Computers and Electronics in Agriculture, 2019; 164: 104899.

Song C C, Zhou Z Y, Zang Y, Zhao L, Yang W, Luo X W, et al. Variable-rate control system for UAV-based granular fertilizer spreader. Computers and Electronics in Agriculture, 2020; 180(1): 105832.

Song C C, Zhou Z Y, Wang G B, Wang X W, Zang Y. Optimization of the groove wheel structural parameters of UAV-based fertilizer apparatus. Transactions of the CSAE, 2021; 37(22): 1–10.

Su N, Xu T S, Song L T, Wang R J, Wei Y Y. Variable rate fertilization system with adjustable active feed-roll length. Int J Agric & Biol Eng, 2015; 8(4): 19–26.

Wang J F, Fu Z D, Jiang R, Song Y L, Yang D Z, Wang Z T. Influences of grooved wheel structural parameters on fertilizer discharge performance: Optimization by simulation and experiment. Powder Technology, 2023; 418: 118309.

Sugirbay A M, Zhao J, Nukeshev S O, Chen J. Determination of pin-roller parameters and evaluation of the uniformity of granular fertilizer application metering devices in precision farming. Computers and Electronics in Agriculture, 2020; 179: 105835.

Sun J X, Chen H M, Duan J L, Liu Z, Zhu Q C. Mechanical properties of the grooved-wheel drilling particles under multivariate interaction influenced based on 3D printing and EDEM simulation. Computers and Electronics in Agriculture, 2020; 172: 105329.

Józef H, Marek M. Parameters and contact models for DEM simulations of agricultural granular materials: A review. Biosystems Engineering, 2016; 147: 206–225.

Marcinkiewicz J, Selech J, Staszak Ż, Gierz Ł, Ulbrich D, Romek D. DEM simulation research of selected sowing unit elements used in a mechanical seeding drill. XXIII Polish-Slovak Scientific Conference on Machine Modelling and Simulations (MMS 2018), 2019; 254: 12. DOI: 10.1051/matecconf/201925402021.

Liu C L, Wei D, Song L N, Li Y N, Du X, Zhang F Y. Systematic study on boundary parameters of discrete element simulation of granular fertilizer. Transactions of the CSAM, 2018; 49(9): 82–89. (in Chinese)

Wang J P, Xu L, Mei S, Hu H R, Zhou J L, Chen Q. Fast and accurate detection of kiwifruits in the natural environment using improved YOLOv4. Int J Agric & Biol Eng, 2024; 17(5): 222–230.

Wu Z J, Li M L, Lei X L, Wu Z Y, Jiang C K, Zhou L, et al. Simulation and parameter optimisation of a centrifugal rice seeding spreader for a UAV. Biosystems Engineering, 2020; 192: 275–293.




Copyright (c) 2025 International Journal of Agricultural and Biological Engineering

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

2023-2026 Copyright IJABE Editing and Publishing Office