Simulation and analysis of the pneumatic recovery for side-cutting loss of combine harvesters with CFD-DEM coupling approach

Tao Jiang, Min Zhang, Zhuohuai Guan, Senlin Mu, Chongyou Wu, Gang Wang, Haitong Li

Abstract


A novel pneumatic recovery method was proposed to curb the problem of high losses caused by side-cutting in a rapeseed combine harvester header. The influence of recovery method and material status changes on the recovery effect was studied via the CFD-DEM (computational fluid dynamic- discrete element method) coupling simulation. The effect of airflow action on the recovery effect was compared and analyzed, and the composite pneumatic recovery method was determined. In addition, the influence of material status changes and material feeding rate on the recovery effect was explored, and the critical condition of material blockage in the recovery device was configured. As such, the relationship model between air velocity and recovery rate was constructed and the air distribution ratio of the flow field in the device under this condition was optimized, had verified the rationality of this pneumatic recovery method was verified by a series of field tests. The average rapeseed recovery rate of 92.95% was achieved with the application of the recovery device, and the total loss rate of the header reduced by 52.26%, which is of great significance in reducing the total loss rate of the combine harvesters and improving the operation performance of machinery. The research results can provide a reference for the design of the header structure of a rape combine harvester.
Keywords: rapeseed, combine harvester, side-cutting loss, coupled simulation, pneumatic recovery
DOI: 10.25165/j.ijabe.20221502.6267

Citation: Jiang T, Zhang M, Guan Z H, Mu S L, Wu C Y, Wang G, et al. Simulation and analysis of the pneumatic recovery for side-cutting loss of combine harvesters with CFD-DEM coupling approach. Int J Agric & Biol Eng, 2022; 15(2): 117–126.

Keywords


rapeseed, combine harvester, side-cutting loss, coupled simulation, pneumatic recovery

Full Text:

PDF

References


Xu L Z., Li Y M, Ma C X, He Z F, Lv F. Design of main working parts of 4LYB1-2.0 rape combine harvester. Transactions of the CSAM, 2008; 39(8): 54–57, 58. (in Chinese)

Hobson R N, Bruce D M. Seed loss when cutting a standing crop of oilseed rape with two types of combine harvester header. Biosystems Engineering, 2002; 81(3): 281–286.

Bruce D M, Farrent J W, Morgan C L. Determining the oil rape pod strength needed to reduce seed loss due to podshatter. Biosystems Engineering, 2002; 81(2): 179–184.

Szpryngiel M, Wesołowski M, Szot B. Economical technology of rape seed harvest. Teka Komisji Motoryzacji IEnergetyki Rolnictwa, 2003; 4(1): 185–195.

Wang R, Ripley V L, Rakow G. Pod shatter resistance evaluation in cultivars and breeding lines of Brassica napus, B. juncea and Sinapis alba. Plant Breeding, 2010; 126(6): 588–595.

Ma N, Zhang C L, Li J, Zhang M H, Cheng Y G, Li G M, Zhang S J. Mechanical harvesting effects on seed yield loss, quality traits and profitability of winter oilseed rape (Brassicanapus L.). Journal of Integrative Agriculture, 2012; 11(8): 1297–1304.

Li H T, Li Q X, Li P, Huang P, Wang X Y, Ji M Y. Design on separating-combined header of rape combine harvester. Journal of Huazhong Agricultural University, 2014; 5: 111–116. (in Chinese)

Chai X Y, Xu L Z, Yan C, Liang Z W, Ma Z, LI Y M. Design and test of cutting frequency follow-up adjusting device for vertical cutting knife of rapeseed cutting machine. Transactions of the CSAM, 2018; 49(12): 93–99. (in Chinese)

Huang X M, Zong W Y. Research status and development trend of rape combine harvester. Agricultural Engineering, 2012; 2(1): 14–19. (in Chinese)

Wang H Z. New-demand oriented oilseed rape industry developing strategy. Chinese Journal of Oil Crop Sciences, 2018; 40(5): 613–617. (in Chinese)

Zhang Q S, Zhang K, Liao Q X, Liao Y T, Wang L, Shu C X. Design and experiment of rapeseed aerial seeding device used for UAV. Transactions of the CSAE, 2020; 36(14): 138–147. (in Chinese)

Lyu W S, Xiao X J, Xiao G B, Huang T B, Xiao F L, Li Y Z, Han D P, Zhen W. Effects of lateral deep application and dosage of slow-release fertilizer on yield and fertilizer utilization efficiency of rape (Brassica napus L.). Transactions of the CSAE, 2020; 36(19): 19-29. (in Chinese)

Wu C Y, Xiao S Y, Jin M. Comparation on rape combine harvesting and two-stage harvesting. Transactions of the CSAE, 2014; 30(17): 10–16. (in Chinese)

Guan Z H, Wu C Y, Wang G, Li H T, Mu S L. Design of bidirectional electric driven side vertical cutter for rape combine harvester. Transactions of the CSAE, 2019; 35(3): 1–8. (in Chinese)

Chen C Y, Wang X Z, He Z F. Design of header for rape harvesting using grain combine harvester. Transactions of the CSAM, 2003; 34(5): 54–56, 60. (in Chinese)

Luo H F, Tang C Z, Guan C Y, Wu M L, Xie P F. Experiment using stalk separator designed for the header of rape harvester. Journal of Hunan Agricultural University, 2012; 38(5): 548–550. (in Chinese)

Ran J H, Mu S L, Li H T, Guan Z H, Tang Q, Wu C Y. Design and test of planet gear driver of reciprocating double-acting cutter for rapeseed combine harvester. Transactions of the CSAE, 2020; 36(9): 17–25. (in Chinese)

Li Z K, Xie P F, Liu K, Tang X, Wang X S, Mao L C. Design and performance evaluation of a disc cutter for rape harvest. Journal of Hunan Agricultural University, 2014; 40(1): 83–88. (in Chinese)

Wu M L, Guan C Y, Tang C D, Chen S Y, Luo H F, Xie P F. Experiments on influencing factors of cutting force of rape stem. Transactions of the CSAE, 2009; 25(6): 141–144. (in Chinese)

Li Y N, Yi Y W, Du S W, Ding Q S, Ding W M. Design and experiment on air blowing header of plot combine harvester for grain. Transactions of the CSAM, 2017; 48(6): 79–87. (in Chinese)

Pan H B, Wang T T, Huang X M, Zha X T, Zong W Y. Numerical simulation of drifting process of oil rape seeds in a longitudinal positive pressure airflow field of the cutting platform. Journal of Huazhong Agricultural University, 2015; 34(3): 117–123. (in Chinese)

Zong W Y, Huang X M, Pan H B, Zha X T, Wang T T. Drifting property of falling oil rape seeds in longitudinal positive pressure airflow field without stalks. Transactions of the CSAE, 2015; 31(3): 70–76. (in Chinese)

Huang X M, Zha X T, Zong W Y, Chen H. Design and test of transverse positive pressure airflow collection device for header losses of rape combine harvester. Transactions of the CSAM, 2016; 47(S1): 227–233. (in Chinese)

Chu K W. CFD-DEM simulation of the effect of particle density distribution on the multiphase flow and performance of dense medium cyclone. Minerals Engineering, 2009; 22(11): 893–909.

Lei X L, Liao Y T, Zhang W Y. Li S S, Wang D, Liao Q X. Simulation and experiment of gas-solid flow in seed conveying tube for rapeseed and wheat. Transactions of the CSAM, 2017; 48(3): 57–68. (in Chinese)

Liu L Y, Hao S Y, Zhang M, Liu D M, Jia F G, Quan L Z. Numerical simulation and experiment on paddy ventilation resistance based on CFD- DEM. Transactions of the CSAM, 2015; 46(8): 27–32, 158. (in Chinese)

Jiang E C, Sun Z F, Pan Z Y, Wang L Y. Numerical simulation based on CFD-DEM and experiment of grain moving laws in inertia separation chamber. Transactions of the CSAM, 2014; 45(4): 117–122. (in Chinese)

Khatchatourian O A, Toniazzo N A, Gortyshov Y F. Simulation of airflow in grain bulks under anisotropic conditions. Biosystems Engineering, 2009; 104(2): 205–215.

Sommerfeld M. Analysis of collision effects for turbulent gas–particle flow in a horizontal channel: Part I. Particle transport. International Journal of Multiphase Flow, 2003; 29(4): 675–699.

Boac J M, Casada, M E, Maghiang, R G. Material and interaction properties of selected grains and oilseeds for modeling discrete particles. Transactions of ASABE, 2010; 53(4): 1201–1216.

Chen L, Liao Q X, Zong W Y, Liao Y T, Li H T, Huang P. Aerodynamic characteristics measurement of extraction components for rape combine harvester. Transactions of the CSAM, 2012; 43(S1): 125–130. (in Chinese)

Lei X L, Liao Y T, Liao Q X. Simulation of seed motion in seed feeding device with DEM-CFD coupling approach for rapeseed and wheat. Computers and Electronics in Agriculture, 2016; 131: 29–39.

Efrain Q P, Richart V R, Raul L A, Victor M B H. An approach to evaluate Venturi-device effects on gas wells production. Journal of Petroleum Science and Engineering, 2014; 116: 8–18.




Copyright (c) 2022 International Journal of Agricultural and Biological Engineering

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

2023-2026 Copyright IJABE Editing and Publishing Office