Factors affecting the quality of biomass pellet for biofuel and energy analysis of pelleting process

Phani K. Adapa, Lope G. Tabil, Greg J. Schoenau

Abstract


Agricultural biomass residue such as barley, canola, oat and wheat straw has the potential to be used for sustainable production of bio-fuels and offset greenhouse gas emissions. The biomass substrate must be processed and handled in an efficient manner in order to reduce industry’s operational cost as well as meet the requirement of raw material for biofuel production. Biomass has low bulk density, making it difficult and costly to store and transport in its native loose form. Therefore, in this study, an integrated approach to densification of non-treated and steam exploded barley, canola, oat and wheat straw was developed. During this process, the significance of major contributing factors (independent variables such as biomass type, treatment, pressure and grind size) on pellet density, durability and specific energy were determined. It has been found that applied pressure (60.4%) was the most significant factor affecting pellet density followed by the application of steam explosion pre-treatment (39.4%) for lab-scale single pelleting experiments. Similarly, the type of biomass (47.1%) is the most significant factor affecting durability followed by the application of pre-treatment (38.2%) and grind size (14.6%) for pellets manufactured using the pilot-scale pellet mill. Also, applied pressure (58.3%) was the most significant factor affecting specific energy required to manufacture pellets followed by the biomass (15.3%), pre-treatment (13.3%) and grind size (13.2%), which had lower but similar effect on specific energy for lab-scale single pelleting experiments. Overall energy analysis of post-harvest processing and densification of agricultural straw was performed, which showed that a significant portion of original agricultural biomass energy (89%-94%) is available for the production of biofuels. Almost, similar amount of specific energy is required to produce pellets from barley, canola, oat and wheat straw grinds. Customized pellets having steam exploded straw required more energy to manufacture resulting in availability of only 89% of total energy for biofuel production.

Keywords


biofuel, biomass, steam explosion, pretreatment, pelleting, specific energy, barley straw, canola straw, oat straw, wheat straw

Full Text:

PDF

References


Campbell C A, Zentner R P, Gameda S, Blomert B, Wall D D. Production of annual crops on the Canadian prairies: trends during 1976-1998. Canadian Journal of Soil Science, 2002; 82: 45-57.

Sokhansanj S, Mani S, Stumborg M, Samson R, Fenton J. Production and distribution of cereal straw on the Canadian Prairies. Canadian Biosystems Engineering, 2006; 48: 3.39-3.46.

Liu R, Yu H, Huang Y. Structure and morphology of cellulose in wheat straw. Cellulose, 2005; 12: 25-34.

Bowyer J L, Stockmann V E. Agricultural residues: an exciting bio-based raw material for the global panel industry. Forest Products Journal, 2001; 51(1): 10-21.

Sokhansanj S, Mani S, Bi X, Zaini P, Tabil L G. Binderless pelletization of biomass. ASAE Annual International Meeting, Tampa Convention Centre, Tampa, Florida, 2005; July 17-20, Paper Number 056061. St. Joseph, MI: ASABE.

Adapa P K, Schoenau G J, Tabil L G, Arinze E A, Singh A, Dalai A K. Customized and value-added high quality alfalfa products - a new concept. Agricultural Engineering International: the CIGR Ejournal, 2007; Manuscript FP 07 003, IX(June): 1-28.

Holley C A. The densification of biomass by roll briquetting. Proceedings of the Institute for Briquetting and Agglomeration (IBA), 1983; 18: 95-102.

Mani S, Tabil L G, Sokhansanj S. An overview of compaction of biomass grinds. Powder Handling and Process, 2003; 15(3): 160-168.

McMullen J, Fasina O O, Wood C W, Feng Y. Storage and handling characteristics of pellets from poultry litter. Applied Engineering in Agriculture, 2005; 21(4): 645-651.

Obernberger I, Thek G. Physical characterization and chemical composition of densified biomass fuels with regards to their combustion behaviour. Biomass and Bioenergy, 2004; 27: 653-669.

Kaliyan N, Morey R V. Factors affecting strength and durability of densified products. American Society of Agricultural and Biological Engineers (ASABE), paper number 066077, 2006.

Larsson S H, Thyrel M, Geladi P, Lestander T A. High quality biofuel pellet production from pre-compacted low density raw materials. Bioresource Technology, 2008; 99: 7176-7182.

Temmerman M, Rabier F, Jensen P D, Hartmann H, Bohm T. Comparative study of durability test methods for pellets and briquettes. Biomass and Bioenergy, 2006; 30(11): 964.

Hill B, Pulkinen D A. A study of factors affecting pellet durability and pelleting efficiency in the production of dehydrated alfalfa pellets. A special report. Tisdale, SK, Canada: Saskatchewan Dehydrators Association. 1988.

Kashaninejad M, Tabil L G. Effect of microwave-chemical pre-treatment on compression characteristics of biomass grinds. Biosystems Engineering, 2011; 108: 36-45.

Li Y, Liu H. High-pressure densification of wood residues to form an upgraded fuel. Biomass and Bioenergy, 2000; 19: 177-186.

Shaw M D, Tabil L G. Compression and relaxation

characteristics of selected biomass grinds. In: ASAE Annual International Meeting, Minneapolis, MN, June 17-20, 2007, Paper Number 076183, 2950 Niles Road, St. Joseph, MI 49085-9659 USA.

Chancellor W L. Friction between soil and equipment materials. 1994, ASAE Paper No. 941034. St. Joseph, MI.: ASABE.

Grover P D, Mishra S K. Biomass Briquetting Technology and Practices. Food and Agriculture Organization (FAO), UN, 1996, Document No. 46.

Gustafson A S, Kjelgaard W L. Hay pellet geometry and stability. Agricultural Engineering, 1963; 44(8): 442-445.

Mani S, Tabil L G, Sokhansanj S. Compaction behavior of some biomass grinds. AIC Paper No. 02-305. Saskatoon, Saskatchewan: AIC 2002 Meeting, CSAE/SCGR Program. 2002.

Mani S, Tabil L G, Sokhansanj S. Effects of compressive force, particle size and moisture content on mechanical properties of biomass pellets from grasses. Biomass and Bioenergy, 2006b; 30(7): 648-654.

Smith E, Probert S, Stokes R, Hansford R. The briquetting of wheat straw. Journal of Agricultural Engineering Research, 1977; 22: 105-111.

Mani S, Tabil L G, Sokhansanj S. Grinding performance and physical properties of wheat and barley straws, corn stover and switchgrass. Biomass and Bioenergy, 2004; 27(4): 339-352.

Drzymala Z. Industrial Briquetting – Fundamentals and Methods. Studies in mechanical engineering 13 Warszawa: PWN-Polish Scientific Publishers. 1993.

Shaw M D. Feedstock and process variables influencing biomass densification. M.Sc. dissertation. Saskatoon, SK, Canada: University of Saskatchewan. 2008.

Harmsen P F H, Huijgen W J J, Bermudez Lopez L M, Bakker R R C. Literature review of physical and chemical pre-treatment processes for lignocellulosic Biomass. Energy Research Centre of the Netherlands. 2010. Report accessed on January 2010. Web Address: http://www. ecn.nl/docs/library/report/2010/e10013.pdf.

Zandersons J, Gravitis J, Zhurinsh A, Kokorevics A, Kallavus U, Suzuki C K. Carbon materials obtained from self-binding sugar cane bagasse and deciduous wood residues plastics. Biomass and Bioenergy, 2004; 26: 345-360.

Lam P S, Sokhansanj S, Bi X, Lim C J, Mani S, Melin S. Energetic feasibility of biomass densification with steam explosion pretreatment. CSBE Annual General Meeting, July 14-16, Poster Number CSBE08305, Vancouver, BC. 2008.

Grous W R, Converse A O, Grethlein H E. Effect of Stem Explosion Pre-treatment on Pore Size and Enzymatic Hydrolysis or Poplar. Enzyme Microbial Technology, 1985;

(8): 274-280.

Kokta B V, Ahmed A. Chapter 6: Steam Explosion Pulping. Environmentally friendly technologies for the pulp and paper industry, ed. R.A. Young and M. Akhtar, ISBN 0-471-15770-8, John Wiley and Sons, Inc. 1998.

Zimbardi F, iggiano D, Nanna F, Demichele M, Cuna D, Cardinale G. Steam explosion of straw in batch and continuous systems. Applied Biochemistry and Biotechnology, 1999; 77-79: 117-125.

Jin S, Chen H. Superfine grinding of steam-exploded rice straw and its enzymatic hydrolysis. Biochemical Engineering Journal, 2006; 30: 225-230.

Adapa P K. Densification of selected agricultural crop residues as feedstock for the biofuel industry – Chapter 7. Ph.D. dissertation. Saskatoon, SK, Canada: University of Saskatchewan. 2011.

Adapa P K, Tabil L G, Schoenau G J. Grinding performance and physical properties of non-treated and steam exploded barley, canola, oat and wheat straw. Biomass and Bioenergy, 2011; 35(1): 549-561.

Adapa P K, Tabil L G, Schoenau G J. Pelleting characteristics of selected biomass with and without steam explosion pretreatment. International Journal of Agricultural and Biological Engineering, 2010; 3(3): 62-79.

Abolins J, Gravitis J. Energy from biomass for conversion of biomass. Latvian Journal of Physics and Technical Sciences, 2009; N 5: 16-23.

Earle R L. Chapter 7 – Drying. In Unit Operations in Food Processing, 1983: Published by The New Zealand Institute of Food Science and Technology (NZIFST) Inc. Accessed online on June 8, 2011. Available at: http://www.nzifst. org.nz/unitoperations/drying1.htm.

Adapa P K, Singh A, Schoenau G J, Tabil L G. Pelleting characteristics of fractionated alfalfa grinds - hardness models. Powder Handling and Processing, 2006; 18(5): 294-299.

Mani S, Tabil L G, Sokhansanj S. Specific energy requirement for compacting corn stover. Bioresource Technology, 2006a; 97(12): 1420-1426.

Cheney W, Kincaid D. Numerical mathematics and computing. Monterey, CA: Brooks/Cole Publishing Company. 1980.

Adapa P K, Tabil L G, Schoenau G J, Sokhansanj S. Pelleting characteristics of fractionated sun-cured and dehydrated alfalfa grinds. Applied Engineering in

Agriculture, 2004; 20(6): 813-820.

Tabil L G, Sokhansanj S. Compression and compaction behavior of alfalfa grinds part 1 – compression behaviour. Journal of Powder Handling and Processing, 1996; 8(1): 17-23.

Kaliyan N, Morey R V. Roll press briquetting of corn stover and switchgrass: A pilot scale continuous briquetting study. ASABE Annual International Meeting, American Society of Agricultural and Biological Engineers, Minneapolis, Minnesota June 17-20, Paper Number 076044. St. Joseph, MI: ASABE. 2007.

Stevens C A. Starch gelatinization and the influence of particle size, steam pressure and die speed on the pelleting process. PhD Diss. Manhattan, KS: Kansas State University. 1987.

Thomas M, van Zuilichem D J, van der Poel A F B. Physical quality of pelleted animal feed. 2. Contribution of processes and its conditions. Animal Feed Science and Technology, 1997; 64(2-4): 173-192.

Biomass Energy. Biomass pellets production stages - part 2: pellet production. Available at: http://www.biomassenergy.gr/en/articles/ technology/biomass/161-biomass-pellets-production-stages-part-2-pellet-production. Accessed on [2011-06-08].

Fasina O O. Cooling characteristics of alfalfa pellets. PhD thesis. Saskatoon, SK, Canada: University of Saskatchewan, 1994.

Fasina O O, Sokhansanj S. Measurement of bulk properties of alfalfa pellets. Canadian Agricultural Engineering, 1993; 35(4): 269-273.

SAS Institute. User’s Guide: Statistics, Version 8.2; Statistical Analysis System, Inc., Cary, NC, USA. 1999.

Head D, Alejo-Lucas D, Cenkowski S, Arntfield S. Dehulling and cooking quality of red lentils – effects of cultivar, storage time, moisture content, and pre-treatments. ASABE Annual International Meeting, David L. Lawrence Convention Centre, Pittsburgh, Pennsylvania, Paper No. 1009140, June 20-23. St. Joseph, MI: ASABE. 2010.

Adapa P K, Tabil L G, Schoenau G J. Compression characteristics of non-treated and steam exploded barley, canola, oat and wheat straw grinds. ASABE Journal of Applied Engineering in Agriculture, 2010a; 26(4): 617-632.

hn H K, Sauer T J, Richard T L, Glanville T D. Determination of thermal properties of composting bulking materials. Bioresource Technology, 2009; 100: 3974-3981.




Copyright (c)



2023-2026 Copyright IJABE Editing and Publishing Office