Measurement and simulation of the suspension velocity of flax threshing material using CFD-DEM

Fei Dai, Wenjuan Guo, Xuefeng Song, Ruijie Shi, Jiangfei Qu, Wuyun Zhao

Abstract


In order to explore the aerodynamics characteristics of flax threshing material, and accurately obtain the movement trajectory of the material of each component in air-screen cleaning, the suspension velocities of flax grains, capsules, short stalks and capsule husks at different stages were measured by means of the suspension velocity device. The experimental results showed that the suspension velocity range was 4.55-8.64 m/s for flax grains, 6.46-10.90 m/s for flax capsules, 3.23-7.75 m/s for flax short stalks, and 1.06-4.21 m/s for flax capsule shells. Based on the experimental results, the overall interval distribution of each component of flax threshing material and the separation characteristics were discussed and the discrete element model of each component of the flax threshing material was established. Through simulation measurement of angle of repose of the material and the sliding friction angle with steel, the reliability of the established model was verified. The gas-solid coupling method was used to simulate the suspension velocity of each component of the flax threshing material, and the suspension velocity of the four components of flax threshing material was obtained. The simulation measurement results were within the actual measurement range, showing that the test results were basically in line with the simulation results. The simulation on the suspension velocity of different components of flax threshing material based on gas-solid coupling had high precision degree. Therefore, the feasibility of the suspension velocity of the flax threshing material measured in the simulation test based on CFD-DEM coupling was verified.
Keywords: flax, threshing material, suspension velocity, CFD-DEM, numerical simulation
DOI: 10.25165/j.ijabe.20211405.6651

Citation: Dai F, Guo W J, Song X F, Shi R J, Qu J F, Zhao W Y. Measurement and simulation of the suspension velocity of flax threshing material using CFD-DEM. Int J Agric & Biol Eng, 2021; 14(5): 230–237.

Keywords


flax, threshing material, suspension velocity, CFD-DEM, numerical simulation

Full Text:

PDF

References


Hou H M, Cui Q L, Guo Y M, Zhang Y Q, Sun D, Lai S T, Liu J L. Design and test of air-sweeping suspension velocity testing device for cleaning threshed materials of grain and oil crops. Transactions of the CSAE, 2018; 34(16): 43–49. (in Chinese)

He Y, Bayly A E, Hassanpour A L. Coupling CFD-DEM with dynamic meshing: A new approach forfluid-structure interaction in particle-fluid flows. Powder Technology, 2018; 325: 620–631.

Gorial B Y. Aerodynamic properties of grain/straw materials. Journal of Agricultural Engineering Research, 1990; 46: 275–290.

Ragab K, Pan Z L, Atungulu G G. Characterization of physical and aerodynamic properties of walnuts. ASABE 2012 Annual Meeting, Paper No. 121338051, Dallas, Texas, USA, 2012.

Gao L X, Zhang W, Du X, Liu X, Yang J, Liu G M. Experiment on aerodynamic characteristics of threshed mixtures of peanut shelling machine. Transactions of the CSAE, 2012; 28(2): 289–292. (in Chinese)

Cao C M, Luo K, Peng M L, Wu Z M, Liu G Z, Li Z. Experiment on winnowing mechanism and winnowing performance of hickory material. Transactions of the CSAE, 2019; 50(9): 105–112. (in Chinese)

Ma Z, Li Y M, Xu L Z. Testing and analysis on rape excursion components characteristics in floating, friction and wettability. Transactions of the CSAE, 2011; 27(9): 13–17. (in Chinese)

Su W, Gao X J, Ren C, Lai Q H. A simulation prediction method of suspension speed of seed particle swarm. Journal of South China Agricultural University, 2016; 37(1): 110–116. (in Chinese)

Yu F F, Li P, Zhang F K, Zhang H, Li Z J, Fan X W. Design and test of measuring device for red jujube material suspension speed. Journal of Chinese Agricultural Mechanization, 2020; 41(9): 89–94. (in Chinese)

Chen L, Liao Q X, Zong W Y, Liao Y T, Li H T, Huang P. Aerodynamic characteristics measurement of extraction components for rape combine

harvester. Transactions of the CSAE, 2012; 43(Z1): 125–130.

Mekonnen Gebreslasie Gebrehiwot, Josse de Baerdemaeker, Martine Baelmans. Numerical and experiment study of a cross-flow fan for combine cleaning shoes. Biosystems Engineering, 2010; 106(4): 448–457.

Yuan J B, Wu C Y, Li H, Qi X D, Xiao X X, Shi X X. Movement rules and screening characteristics of rice-threshed mixture separation through a cylinder sieve. Computers and Electronics in Agriculture, 2018; 154: 320–329.

Jiang E C, Sun Z F, Pan Z Y, Wang L J. Numerical simulation based on CFD-DEM and experiment of grain moving laws in inertia separation chamber. Transactions of the CSAE, 2014; 45(4): 117–122. (in Chinese)

Dai F, Song X F, Guo W J, Zhao W Y, Zhang F W, Zhang S L. Simulation and test on separating cleaning process of flax threshing material based on gas-solid coupling theory. Int J Agric & Biol Eng, 2020; 13(1): 73–81.

Dai F. Study on the separating-cleaning mechanism and key technology of flax threshing material. Lanzhou: Gansu Agricultural University, 2020. (in Chinese)

Sebastian R, Shkelqim K, Joachim M. Discrete element method simulation of the hulling process of Jatropha curcas L. fruits. Biosystems Engineering, 2017; 155: 55–67.

Coetzee C J. Calibration of the discrete element method and the effect of particle shape. Power Technology, 2016; 297: 50–70.

Dai F, Zhao W Y, Song X F, Shi R J, Liu G C, Wei B. Parameter optimization and experiment on separating and cleaning machine for flax threshing material. Transactions of the CSAE, 2020; 51(8): 140–147. (in Chinese)

Wen X Y, Jia H L, Zhang S W, Yuan H F, Wang G, Chen T Y. Test of suspension velocity of granular fertilizer based on EDEM-Fluent coupling. Transactions of the CSAE, 2020; 51(3): 69–77. (in Chinese)

Wang S Y, Li H L, Wang R C, Wang X, Tian R C, Sun Q J. Effect of the inlet angle on the performance of a cyclone separator using CFD-DEM. Advanced Powder Technology, 2019; 30(2): 227–239.

Peng Z B, Doroodchi E, Moghtaderi B, Evans G M. A DEM-based analysis of the influence of aggregate structure on suspension shear yield stress. Advanced Powder Technology, 2012; 23(4): 437–444.

Dai F, Song X F, Shi R J, Zhao W Y, Guo W J, Zhang Y. Migration law of flax threshing materials in double channel air-and-screen separating cleaner. Int J Agric & Biol Eng, 2021; 14(3): 92–102.




Copyright (c) 2021 International Journal of Agricultural and Biological Engineering

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

2023-2026 Copyright IJABE Editing and Publishing Office