Optimized design and experiments of a rotary-extensive-type flowerpot seedling transplanting mechanism

Daqing Yin, Jiazhao Wang, Shuo Zhang, Nuoyi Zhang, Maile Zhou

Abstract


To realize the mechanization of flowerpot seedling transplanting, a creative mechanism to transplant flowerpot seedlings was designed. The mechanism is based on noncircular gear in combination with a transplanting arm equipped with an extensive seedling pick-up device to transplant the flowerpot seedlings from the growing tray to the flowerpot, which in accordance with the transplanting agronomy requirements. The working principles of a theoretical model and kinematic characteristics of the transplanting mechanism were analyzed. The computer-aided analysis and optimization software based on Visual Basic 6.0 was developed and used to obtain a set of special trajectory and attitude parameters satisfying the transplanting operation requirements. The optimized parameters were used for virtual manufacturing and simulation testing of the transplanting mechanism. The virtual prototype testing results are consistent with the theoretical analysis, verifying the structural design validity and rationality. The high-speed photography was used in a bench test of the transplanting mechanism with “Salvia Splendens” pot seedlings as test samples. The trajectory and attitudes of the theoretical analysis, virtual test, and physical prototype test were essentially identical. The bench test results showed that the success rate was 91.67% for the seedling pick-up device penetrating into the root mass at 35 mm, thus, the quality of the extracting seedling was satisfactory.
Keywords: transplanting mechanism, rotary-extensile type, pot seedlings, flowers
DOI: 10.25165/j.ijabe.20191206.5188

Citation: Yin D Q, Wang J Z, Zhang S, Zhang N Y, Zhou M L. Optimization design and experiments of a rotary-extensile type flowerpot seedling transplanting mechanism. Int J Agric & Biol Eng, 2019; 12(6): 45–50.

Keywords


transplanting mechanism, rotary-extensile type, pot seedlings, flowers

Full Text:

PDF

References


Li X M. 2019 year World Flower Conference held in Beijing. Land Greening, 2019; 9: 7. (in Chinese)

Zhou B, Liu D M, Nie Y M. Effects of specialized controlled-release fertilizer on quality of herbaceous plug-seedling and growth of transplanting. Journal of Shandong Agricultural University: Natural Science Edition, 2010; 4: 50–53. (in Chinese)

Gu S, Yang Y L, Zhang Y F. Development status of automated equipment systems for greenhouse potted flowers production in Netherlands. Transactions of the CSAE, 2012; 28(19): 1–8. (in Chinese)

Brewer H L. Conceptual modeling automated seedling transfer from growing trays to hipping modules. Transactions of the ASAE, 1994; 37(4): 1043–1051.

Choi W C, Kim D C, Yu H R. Development of a seedling pick-up device for vegetable transplanting. Transactions of the ASAE, 2002; 45(1): 13–19.

Kutz L J, Craven J B. Evaluation of photo electric sensors for robotic transplanting. Applied Engineering in Agriculture, 1994; 10(1): 115–122.

Liu J D, Cao W B, Tian D Y, Tang H Y, Zhao H Z. Kinematic analysis and experiment of planetary five-bar planting mechanism for zero-speed transplanting on mulch film. Int J Agric & Biol Eng, 2016; 9(4): 84–91.

Ye B L, Yi W M, Yu G H, Gao Y, Zhao X. Optimization design and test of rice plug seedling transplanting mechanism of planetary gear train with incomplete eccentric circular gear and non-circular gears. Int J Agric & Biol Eng, 2017; 10(6): 43–55.

Zhou M L, Hua Z Y, Wang J Y, Wang L, Zhao Y, Yin D Q. New type of transverse moving box mechanism for pot seedling transplanting machine. Int J Agric & Biol Eng, 2018; 11(2): 70–75.

Jin X, Li D Y, Ma H, Ji J T, Zhao K X, Pang J. Development of single row automatic transplanting device for potted vegetable seedlings. Int J Agric & Biol Eng, 2018; 11(3): 67–75.

Gao G H, Feng T X, Li F. Design and optimization of operating parameters for potted anthodium transplant manipulator. Transactions of the CSAE, 2014; 30(17): 34 –42. (in Chinese)

Feng Q C, Wang X, Jiang K, Zhou J J, Zhang R, Ma W. Design and test of key parts on automatic transplanter for flower seedling. Transactions of the CSAE, 2013; 29(6): 21–27. ( in Chinese)

Zhou M F, Xu J J, Tong J H, Yu G H, Zhao X, Xie J. Design and test of an automatic transplanting mechanism for flower cave seedling taking and transplanting. Transactions of the CSAE, 2018; 34(20): 44–51. (in Chinese)

Zhou M L, Sun L, Du X Q, Zhao Y, Xin L. Optimal design and experiment of rice pot seedling transplanting mechanism with planetary bezier gears. Transactions of the ASABE, 2014; 57(6): 1537–1548.

Zuo Y J, Yu X X, Li W G, Zhu H X, Ji H P. Kinematic optimization of transplanting mechanism with B-Spline curve gear for rice pot seedling based on Matlab. Applied Mechanics and Materials, 2014; 624:181–186.

Zhao Y, Zhou M L, Yin D Q, Zhang S. Rotary flower potted plant. Chinese Patent No. CN201610102591.2, 2016-02-17.

Zhao Y, Zhao X, Zhang W W, Dai L. Modern design theory and method of rice transplanter. Transactions of the CSAM, 2011; 42(3): 79–83. (in Chinese)

Hu M J, Yin W Q. Experimental research on the deformed sliding needle pick-up device for plug seedlings. Acta Agriculturae Zhejiangensis, 2011, 23(1): 154–158. (in Chinese)

Wang Y Y, Yu Y H. Experiment and analysis of impact factors for soil matrix intact rate of manipulator for picking-up plug seedlings. Transactions of the CSAE, 2015; 31(14): 21–27.( in Chinese)




Copyright (c) 2019 International Journal of Agricultural and Biological Engineering

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

2023-2026 Copyright IJABE Editing and Publishing Office