Sowing uniformity of bed-type pneumatic maize planter at various seedbed preparation levels and machine travel speeds

Fiaz Ahmad, Muhammad Adeel, Baijing Qui, Jing Ma, Muhammad Shoaib, Amir Shakoor, Farman Ali Chandio

Abstract


Precision planters are important machines in the regime of modern technological agriculture. Field conditions, seed metering system and machine operating parameters affect the pneumatic planter performance. The pneumatic planter was evaluated to determine the effect of three tillage levels (L1, L2, and L3) and four travel speeds (S1, S2*, S3 and S4). The sowing uniformity of the planter was observed with respect to the horizontal distribution of seeds within a row and described by using the precision index (Ip), the multiple index (Imult), the miss-seeding index (Imiss) and the quality of feed index (Iqf). The results revealed that the tillage levels (L) and travel speed (S) had a significant effect (p<0.05) on dependent variables. The maximum Imiss (22.12%) was observed at L1 and S4 whereas the maximum Imult was observed at L1 and S1. The mean values of missing-, multi-, quality- feed and precision indices were 5.14%, 5.833%, 89.03% and 17.85% at L3, respectively. The mean values of multi-index 17.59%, 14.44%, 12.40% and 10.18%, quality feed index 74.07%, 75.92%, 75.74% and 74.07% and precision indices 21.47%, 23.26%, 25.51% and 28.53% were at S1, S2, S3 and S4, respectively. The study showed that maize could be seeding within an acceptable precise range by bed-type pneumatic planter subjected to the proper seedbed preparation level.
Keywords: sowing uniformity, pneumatic planter, tillage levels, travel speed
DOI: 10.25165/j.ijabe.20211401.5054

Citation: Ahmad F, Adeel M, Qiu B J, Ma J, Shoaib M, Aamir S, et al. Sowing uniformity of bed-type pneumatic maize planter at various seedbed preparation levels and machine travel speeds. Int J Agric & Biol Eng, 2021; 14(1): 165–171.

Keywords


sowing uniformity, pneumatic planter, tillage levels, travel speed

Full Text:

PDF

References


Pakistan Govt. Economic Survey of Pakistan. 2018. Available: http://www.finance.gov.pk/survey_1718.html. Accessed on [2019-01-21].

Xing H, Wang Z M, Luo X W, Cao X M, Liu C B, Zang Y. General structure design and field experiment of pneumatic rice direct seeder. Int J Agric & Biol Eng, 2017; 10(6): 31–42.

Yang L, Yan B X, Yu Y M, He X T, Liu Q W, Liang Z J, et al. Global overview of research progress and development of precision maize planters. Int J Agric & Biol Eng, 2016; 9(1): 9–26.

Zhao Z, Li Y, Chen J, Xu L Z. Numerical analysis and laboratory testing of seed spacing uniformity performance for vacuum-cylinder precision seeder. Biosystems Engineering, 2010; 106(4): 344–351.

Zhang M H, Wang Z M, Luo X W, Zang Y, Yang W W, Xing H, et al. Review of precision rice hill-drop drilling technology and machine for paddy. Int J Agric & Biol Eng, 2018; 11(3): 1–11.

Grewal R S, Khurana R, Manes G S, Dixit A, Verma A. Development and evaluation of tractor operated inclined plate metering device for onion seed planting. Agric Eng Int: CIGR Journal, 2015; 17: 31–35.

Kachman S D, Smith J A. Alternative measures of accuracy in plant spacing for planters using single seed metering. Transactions of the ASAE, 1995; 38: 379–387.

Karayel D, Barut Z B, Ozmerzi A. Mathematical modelling of vacuum pressure on a precision seeder. Biosystems Engineering, 2004; 87(4): 437–444.

Singh R C, Singh G, Saraswat D C. Optimisation of design and operational parameters of a pneumatic seed metering device for planting cottonseeds. Biosystems Engineering, 2005; 92: 429–438.

Liu Q W, He X T, Yang L, Zhang D X, Cui T, Qu Z, et al. Effect of travel speed on seed spacing uniformity of corn seed meter. Int J Agric & Biol Eng, 2017; 10(4): 98–106.

Yasir S H, Liao Q X, Yu J J, He D L. Design and test of a pneumatic precision metering device for wheat. Agric Eng Int: CIGR Journal, 2012; 14: 16–25.

Liu Q W, Cui T, Zhang D X, Yang L, Wang Y X, He X T, et al. Design and experimental study of seed precise delivery mechanism for high-speed maize planter. Int J Agric & Biol Eng, 2018; 11(4): 81–87.

Zhang G Z, Zang Y, Luo X W, Wang Z M, Zhang Q, Zhang S S. Design and indoor simulated experiment of pneumatic rice seed drilling metering device. Int J Agric & Biol Eng, 2015; 8(4): 10–18.

Liao Y T, Wang L, Liao Q X. Design and test of an inside-filling pneumatic precision centralized seed-metering device for rapeseed. Int J Agric & Biol Eng, 2017; 10(2): 56–62.

Zhang R, Cui T, Yin X W, Zhang D X, Li K H, Han D D, et al. Design of depth-control planting unit with single side gauge wheel for no till maize precision planter. Int J Agric & Biol Eng, 2016; 9(6): 56–64.

Yin X, Noguchi N, Yang T X, Jin C Q. Development and evaluation of a low-cost precision seeding control system for a corn drill. Int J Agric & Biol Eng, 2018; 11(5): 95–99.

Bozdogan A M. Seeding uniformity for vacuum precision seeder. Sci Agric(Piracicaba, Braz), 2008; 65: 318–322.

Mursec B, Vindis P, Janzekovic M, Brus C F. Testing of quality of sowing by pneumatic sowing machines. Journal of Achievements in Materials Engineering, 2008; 26: 81–88.

Jia H L, Zhang Z, Chen Z, Zheng T Z, Zhao J L, Guo M Z. Friction wheel transmission of no-tillage corn planters. Int J Agric & Biol Eng, 2017; 10(4): 87–97.

Huang Y X, Wang B T, Yao Y X, Ding S P, Zhang J C, Zhu R X. Parameter optimization of fluted-roller meter using discrete element method. Int J Agric & Biol Eng, 2018; 11(6): 65–72.

Liu L J, Yang H, Ma S C. Experimental study on performance of pneumatic seeding system. Int J Agric & Biol Eng, 2016; 9(6): 84–90.

Arzu Y, Adnan D. Optimisation of the seed spacing uniformity performance of a vacuum-type precision seeder using response surface methodology. Biosystems Engineering, 2007; 97: 347–356.

Aykas E, Yıldız E P. The accuracy in seed spacing of a seeder with variable ratio. In: Ertekin C, editor. XIX world congress of CIGR (International Commsion of Agricultural and Biosystem Engineering), Antalya, Turkey, 2018; pp.326-337.

Iqbal M, Muneer A M, Hussain K A, Umair M. Evaluation of the energy efficient zone disk drill for sowing of wheat after harvesting paddy crop. Internation Journal of Agriculture and Biology, 2012; 14: 633–636.

Muneer A M, Iqbal M, Miran S. Evaluation of three seed furrow openers mounted on a zone disk tiller drill for residue management, soil physical properties and crop parameters. Pakistan Journal of Agriculture Sciences, 2012; 49: 349–355.

Karayel D, Özmerzi A. Effect of tillage methods on sowing uniformity of maize. Canadian Biosystem Engineering, 2002; 44: 23–26.

Altikat S. Effects of strip width and tractor forward speed on sowing uniformity of maize and sunflower. Bulgarian Journal of Agricultural Science, 2013; 18: 375–381.

Shi S, Zhang D X, Yang L, Cui T, Zhang R, Yin X W. Design and experiment of pneumatic maize precision seed meter with combined holes. Transactions of the CSAE, 2014; 30(5): 10–18. (in Chinese)




Copyright (c) 2021 International Journal of Agricultural and Biological Engineering

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

2023-2026 Copyright IJABE Editing and Publishing Office