Graphene oxide/multi-walled carbon nanotubes/gold nanoparticle hybridfunctionalized disposable screen-printed carbon electrode to determine Cd(II) and Pb(II) in soil

Hui WANG, Yuan Yin, Guo Zhao, Fernando Bienvenido, Isabel M Flores-Parrad, Zhiqiang Wang, Gang Liu

Abstract


Cadmium (Cd) and lead (Pb) in soil or water environment cause the ecological destruction and environmental deterioration when their contents exceed the natural background values. To trace the concentrations of Cd(II) and Pb(II), a sensitive and selective electrode was developed using disposable screen-printed carbon electrode (SPE) immobilized with a composite film of reduced graphene oxide/carboxylation multi-walled carbon nanotubes/gold nanoparticle hybrid (RGO-MWNT-AuNP) through π-π bind. This highly conductive nano-composite layer, “RGO-MWNT-AuNP,” was characterized by scanning electron microscopy, UV-visible spectrometer, cyclic voltammetry, and electrochemical impedance spectroscopy. Square wave stripping voltammetry was applied to RGO-MWNT-AuNP/SPE to electroplate bismuth film and monitor the Cd(II) and Pb(II) simultaneously. To obtain high current responses, the detecting parameters were optimized. Under optimized conditions, the current responses showed a linear relationship with the concentrations of Cd(II) and Pb(II) in the range from 1.0 to 80.0 μg/L with a lower detection limit of 0.7 µg/L and 0.3 µg/L (S/N = 3), respectively. Finally, the prepared electrode was further employed to detect Cd(II) and Pb(II) in soil samples with good results.
Keywords: electrochemical electrode, heavy metal contamination, screen-printed carbon electrode, graphene, gold nanoparticle, lead, cadmium, multi-walled carbon nanotube
DOI: 10.25165/j.ijabe.20191203.4300

Citation: Wang H, Yin Y, Zhao G, Bienvenido F, Flores-Parrad I M, Wang Z Q, et al. Graphene oxide/multi-walled carbon nanotubes/gold nanoparticle hybridfunctionalized disposable screen-printed carbon electrode to determine Cd(II) and Pb(II) in soil. Int J Agric & Biol Eng, 2019; 12(3): 194–200.

Keywords


electrochemical electrode, heavy metal contamination, screen-printed carbon electrode, graphene, gold nanoparticle, lead, cadmium, multi-walled carbon nanotube

Full Text:

PDF

References


Z L, Z M, TJ vdK, Z Y, L H. A review of soil heavy metal pollution from mines in China: pollution and health risk assessment. Science of the Total Environment, 2014; 468–469: 843853. doi: 10.1016/j.scitotenv.2013.08. 090.

Zhou X, Zhu G, Sun J, Cailin Q. Toxicity of copper, zinc, lead, cadi mum to tissue’s cellurdna of the fish (Carassius auratus). Acta Agriculturaenucleataesinica, 2001; 15: 167–173. doi: 10.1007/bf02141899.

Akcay H, Oguz A, Karapire C. Study of heavy metal pollution and speciation in Buyak Menderes and Gediz river sediments. Water Research, 2003; 37: 813–822. doi: 10.1016/s0043-1354(02)00392-5.

Duruibe J O, Ogwuegbu M O C. Heavy metal pollution and human biotoxic effects. International Journal of Physical Sciences, 2007; 2: 112–118. doi: 10.1163/2210-7975_hrd-0514-0058.

Bala A, Suleiman N, Junaidu A U, Salihu M D, Ifende V I, Saulawa M A, et al. Detection of lead (Pb), cadmium (Cd), chromium (Cr) nickel (Ni) and magnesium residue in kidney and liver of slaughtered cattle in Sokoto central abattoir, Sokoto state, Nigeria. International Journal of Livestock Research, 2014; 4: 74. doi: 10.5455/ijlr.20131002072458.

Cheng S. Heavy metal pollution in China: origin, pattern and control. Environmental Science & Pollution Research International, 2003; 10: 192–198.

Liu F F. Determination with graphite furnace atomic absorption spectrometry of lead content in pork. Chinese Journal of Urban & Rural Enterprise Hygiene, 2017. doi: 10.3403/02147605u.

Juanni N, Liu J, Zhang Y, Zhang P, Zhang H. Inductively Coupled Plasma Mass Spectrometry Lead, Cadmium in Drinking Water. Guangdong Chemical Industry, 2014. doi: 10.3403/30174177.

Li J X, Sun C J, Li Z, Jiang F H, Yin X F, Chen J H, et al. Determination of lead species in algae by capillary electrophoresis-inductively coupled plasma-mass spectrometry. Chinese Journal of Analytical Chemistry, 2016; 44: 1659–1664. doi: 10.1007/978-1-4939-6403-1_10.

Chen K L, Jiang S J, Chen Y L. Determining lead, cadmium and mercury in cosmetics using sweeping via dynamic chelation by capillary electrophoresis. Analytical & Bioanalytical Chemistry, 2017; 409: 2461–2469. doi: 10.1007/s00216-017-0193-1.

Li Y N, Xu Z B, Liu S L. Determination of lead and arsenic in iron ore by X-ray fluorescence spectrometry based on genetic neural network. Metallurgical Analysis, 2017. doi: 10.13228/j.boyuan.issn1000-7571. 010103

Zhang H, Jiang B, Xiang Y, Su J, Chai Y, Yuan R. DNAzyme-based highly sensitive electronic detection of lead via quantum dot-assembled amplification labels. Biosensors & Bioelectronics, 2011; 28: 135. doi: 10.1016/j.bios.2011.07.009.

Gumpu M B, Sethuraman S, Krishnan U M, Rayappan J B B. A review on detection of heavy metal ions in water-An electrochemical approach. Sensors & Actuators B Chemical, 2015; 213: 515–533. doi: 10.1016/ j.snb.2015.02.122.

María-Hormigos R, Gismera M J, Procopio J R, Sevilla M T. Disposable screen-printed electrode modified with bismuth–PSS composites as high sensitive sensor for cadmium and lead determination. Journal of Electroanalytical Chemistry, 2016; 767: 114–122. doi: 10.1016/ j.jelechem.2016.02.025.

Abdi M M, Abdullah L C, Sadrolhosseini A R, Mat Yunus W M, Moksin M M, Tahir P M. Surface plasmon resonance sensing detection of mercury and lead ions based on conducting polymer composite. Plos One, 2011; 6: e24578. doi: 10.1371/journal.pone.0024578.

López-García I, Vicente-Martínez Y, Hernández-Córdoba M. Determination of lead and cadmium using an ionic liquid and dispersive liquid-liquid microextraction followed by electrothermal atomic absorption spectrometry. Talanta, 2013; 110: 46–52. doi: 10.1016/j.talanta.2013. 02.015.

Li T, Dong S, Wang E. A lead(II)-driven DNA molecular device for turn-on fluorescence detection of lead(II) ion with high selectivity and sensitivity. Journal of the American Chemical Society, 2010; 132: 13156. doi: 10.1021/ja105849m.

Rafiee M A. Graphene. Dissertations & Theses - Gradworks, 2011; 442: 282–286.

Khabashesku V N, Margrave J L. Chemistry of carbon nanotubes. Cheminform, 2006; 106: 1105–36. doi: 10.5772/51869.

Sui Z, Meng Q, Zhang X, Ma R, Cao B. Green synthesis of carbon nanotube–graphene hybrid aerogels and their use as versatile agents for water purification. Journal of Materials Chemistry, 2012; 22: 8767–8771. doi: 10.1039/c2jm00055e.

Palanisamy S, Cheemalapati S, Chen SM. Amperometric glucose biosensor based on glucose oxidase dispersed in multiwalled carbon nanotubes/graphene oxide hybrid biocomposite. Materials Science & Engineering C Materials for Biological Applications, 2014; 34: 207–213. doi: 10.1016/j.msec.2013.09.011.

Dreyer D R, Park S, Bielawski C W, Ruoff R S. The chemistry of graphene oxide. Chemical Society reviews, 2014; 43: 5288. doi: 10.1039/b917103g.

Wang, Q, Wang, S, Shang, J, Qiu, S, Zhang, W, Wu, X, Li J H, Chen W X, Wang, X. Enhanced electronic communication and electrochemical sensitivity benefiting from the cooperation of quadruple hydrogen bonding and π–π Interactions in graphene/multi-walled carbon nanotube hybrids. ACS applied materials & interfaces, 2017; 9(7): 6255–6264. doi: 10.1021/acsami.6b11157.

Verma H N, Singh P, Chavan R M. Gold nanoparticle: synthesis and characterization. Veterinary World, 2014; 7: 72–77. doi: 10.14202/ vetworld.2014.72-77.

Xiao L, Xu H, Zhou S, Song T, Wang H, Li S, Wei G, Yuan Q.

Simultaneous detection of Cd(II) and Pb(II) by differential pulse anodic stripping voltammetry at a nitrogen-doped microporous carbon/Nafion/ bismuth-film electrode. Electrochimica Acta, 2014; 143: 143–151. doi: 10.1016/j.electacta.2014.08.021.

Liu R, Cao H, Nie Z, Si S, Zhao X, Zeng X. A disposable expanded graphite paper electrode with self-doped sulfonated polyaniline/antimony for stripping voltammetric determination of trace Cd and Pb. Analytical Methods, 2016; 8: 1618–1625. doi: 10.1039/c5ay03094c.

Zhou H, Hou H, Dai L, Li Y, Zhu J, Wang L. Preparation of dendritic bismuth film electrodes and their application for detection of trace Pb(Ⅱ)and Cd(Ⅱ). Chinese Journal of Chemical Engineering, 2016; 24: 410–414. doi: 10.1016/j.cjche.2015.08.012.

Wang H, Zhao G, Zhang Z H, Yi Y, Wang Z Q, Liu G. A portable electrochemical workstation using disposable screen-printed carbon electrode decorated with multiwall carbon nanotube-ionic liquid and bismuth film for Cd(II) and Pb(II) determination. International Journal of Electrochemical Science, 2017; 12: 4702–4713. doi: 10.20964/2017.06.73.

Chaiyo S, Mehmeti E, K Ž, Siangproh W, Chailapakul O, Kalcher K. Electrochemical sensors for the simultaneous determination of zinc, cadmium and lead using a Nafion/ionic liquid/graphene composite modified screen-printed carbon electrode. Analytica Chimica Acta, 2016; 918: 26–34. doi: 10.1016/j.aca.2016.03.026.

Liu X, Li Z, Ding R, Ren B, Li Y. A nanocarbon paste electrode modified with nitrogen-doped graphene for square wave anodic stripping voltammetric determination of trace lead and cadmium. Microchimica Acta, 2016; 183: 709–714. doi: 10.1007/s00604-015-1713-3.

Wang H, Zhao G, Yin Y, Wang Z, Liu G. Screen-printed electrode modified by bismuth /fe3o4 nanoparticle/ionic liquid composite using internal standard normalization for accurate determination of Cd(II) in Soil. Sensors, 2017; 18(1): 6. doi: 10.3390/s18010006.




Copyright (c) 2019



2023-2026 Copyright IJABE Editing and Publishing Office