Developing a screw conveyor in radio frequency systems to improve heating uniformity in granular products

Hongxue Zhou, Shaojin Wang

Abstract


Radio frequency (RF) treatments have been increasingly studied due to the rapid heating, deep power penetration depth and high energy efficiency. However, the major challenges for commercial RF applications are non-uniform and run-away heating. The purpose of this study was to improve RF heating uniformity in three granular products (soybean, corn, and peanut) using a custom-made screw conveyor with sample movement and mixing. The results showed that soybean, corn and peanut samples in the screw conveyor were RF heated in a similar heating rate under the selected electrode gap and screw rotation speed, and the variations between the highest and lowest temperatures in the three samples were all clearly reduced as compared to the stationary treatments. The RF heating uniformity index was also reduced for soybean, corn, and peanut during and after the RF treatment. Therefore, the screw conveyor could improve RF heating uniformity due to stable, continuous, uninterrupted movement and mixing of samples. The small-scale screw conveyor used in RF systems would provide a solid basis for further large-scale industrial applications.
Keywords: radio frequency (RF), screw conveyor, heating uniformity, movement, mixing
DOI: 10.25165/j.ijabe.20191203.4227

Citation: Zhou H X, Wang S J. Developing a screw conveyor in radio frequency systems to improve heating uniformity in granular products. Int J Agric & Biol Eng, 2019; 12(3): 174–179.

Keywords


radio frequency (RF), screw conveyor, heating uniformity, movement, mixing

Full Text:

PDF

References


Koral T. Radio frequency heating and post-baking. Biscuit World Issue, 2004; 7(4): 1–6.

Palazoğlu T K, Coskun Y, Kocadağli T, Gokmen V. Effect of radio frequency postdrying of partially baked cookies on acrylamide content, texture, and color of the final product. Journal of Food Science, 2012; 77(5): E113–E117.

Laycock L, Piyasena P, Mittal G S. Radio frequency cooking of ground, comminuted and muscle meat products. Meat Science, 2003; 65(3): 959–965.

Farag K W, Duggan E, Morgan D J, Cronin D A, Lyng J G. A comparison of conventional and radio frequency defrosting of lean beef meats: Effects on water binding characteristics. Meat Science, 2009; 83(2): 278–284.

Marra F, Zhang L, Lyng J G. Radio frequency treatment of foods: Review of recent advances. Journal of Food Engineering, 2009; 91(4): 497–508.

Lee N H, Li C, Zhao X, Park M J. Effect of pretreatment with high temperature and low humidity on drying time and prevention of checking during radio-frequency/vacuum drying of Japanese cedar pillar. Journal of Wood Science, 2010; 56(1): 19–24.

Wang Y, Zhang L, Johnson J, Gao M, Tang J, Powers J R, et al. Developing hot air-assisted radio frequency drying for in-shell macadamia nuts. Food and Bioprocess Technology, 2014; 7(1): 278–288.

Gao M, Tang J, Villa-Rojas R, Wang Y, Wang S. Pasteurization process development for controlling Salmonella in in-shell almonds using radio frequency energy. Journal of Food Engineering, 2011; 104(2): 299–306.

Kim S Y, Sagong H G, Choi S H, Ryu S, Kang D H. Radio-frequency heating to inactivate Salmonella Typhimurium and Escherichia coli O157:H7 on black and red pepper spice. International Journal of Food Microbiology, 2012; 153(1-2): 171–175.

Ling B, Ouyang S, Wang S. Radio-frequency treatment for stabilization of wheat germ: Storage stability and physicochemical properties. Innovative Food Science and Emerging Technologies, 2019; 52: 158-165.

Hou L, Ling B, Wang S. Development of thermal treatment protocol for disinfesting chestnuts using radio frequency energy. Postharvest Biology and Technology, 2014; 98: 65–71.

Piyasena P, Dussault C, Koutchma T, Ramaswamy H S, Awuah G B. Radio frequency heating of foods: Principles, applications and related properties - A review. Critical Reviews in Food Science and Nutrition, 2003; 43(6): 587–606.

Liu Y H, Yang B L, Mao Z H. Radio frequency technology and its applicationin agro-product and food processing. Transactions of the CSAM, 2010; 41(8): 115–120. (in Chinese)

Jiao Y, Tang J, Wang S, Koral T. Influence of dielectric properties on the heating rate in free-running oscillator radio frequency systems. Journal of Food Engineering, 2014; 120: 197–203.

Wang K, Zhu H, Chen L, Li W, Wang S. Validation of top electrode voltage in free-running oscillator radio frequency systems with different moisture content soybeans. Biosystems Engineering, 2015; 131: 41–48.

Zhou H, Guo C, Wang S. Performance comparison between the free running oscillator and 50 Ω radio frequency systems. Innovative Food Science & Emerging Technologies, 2017; 39: 171–178.

Jiao Y, Tang J, Wang S. A new strategy to improve heating uniformity of low moisture foods in radio frequency treatment for pathogen control. Journal of Food Engineering, 2014; 141: 128–138.

Chen L, Wang K, Li W, Wang S. A strategy to simulate radio frequency heating under mixing conditions. Computers and Electronics in Agriculture, 2015; 118: 100–110.

Huang Z, Zhu H, Yan R, Wang S. Simulation and prediction of radio frequency heating in dry soybeans. Biosystems Engineering, 2015; 129: 34–47.

Fu Y C. Fundamentals and industrial applications of microwave and radio frequency in food processing. In J. S. Smith, & Y. H. Hui (Eds.), Food processing: Principles and applications. (pp.79–100), Iowa: Blackwell, 2004.

Wang S, Tiwari G, Jiao S, Johnson J A, Tang J. Developing postharvest disinfestation treatments for legumes using radio frequency energy. Biosystems Engineering, 2010, 105(3): 341–349

Tiwari G, Wang S, Tang J, Birla S L. Computer simulation model development and validation for radio frequency (RF) heating of dry food materials. Journal of Food Engineering, 2011; 105(1): 48–55.

Uyar R, Erdogdu F, Marra F. Effect of load volume on power absorption and temperature evolution during radio-frequency heating of meat cubes: A computational study. Food and Bioproducts Processing, 2014; 92(3): 243–251.

Zhou L, Ling B, Zheng A, Zhang B, Wang S. Developing radio frequency technology for postharvest insect control in milled rice. Journal of Stored Products Research, 2015; 62: 22–31.

Ling B, Hou L, Li R, Wang S. Storage stability of pistachios as influenced by radio frequency treatments for postharvest disinfestations. Innovative Food Science & Emerging Technologies, 2015; 33: 357–364.

Zheng A, Zhang B, Zhou L, Wang S. Application of radio frequency pasteurization to corn (Zea mays L.): Heating uniformity improvement and quality stability evaluation. Journal of Stored Products Research, 2016; 68: 63–72.

Romano V, Marra F. A numerical analysis of radio frequency heating of regular shaped foodstuff. Journal of Food Engineering, 2008; 84(3): 449–457.

Soto-Reyes N, Temis-Pérez A L, López-Malo A, Rojas-Laguna R, Sosa-Morales M E. Effects of shape and size of agar gels on heating uniformity during pulsed microwave treatment. Journal of Food Science, 2015; 80(5): E1021–1025.

Zhang S, Huang Z, Wang S. Improvement of radio frequency (RF) heating uniformity for peanuts with a new strategy using computational modeling. Innovative Food Science & Emerging Technologies, 2017; 41:79–89.

Chen J, Lau S K, Chen L, Wang S. Subbiah J. Modeling radio frequency heating of food moving on a conveyor belt. Food and Bioproducts Processing, 2017; 102: 307–319.

Bedane T F, Chen L, Marra F, Wang S. Experimental study of radio frequency (RF) thawing of foods with movement on conveyor belt. Journal of Food Engineering, 2017; 201: 17–25.

Waje S S, Thorat B N, Mujumdar A S. Screw conveyor dryer: Process and equipment design. Drying Technology, 2007; 25(1): 241–247.

Dai J, Grace J R. A model for biomass screw feeding. Powder Technology, 2008; 186(1): 40–55.

Dhenge R M, Washino K, Cartwright J J, Hounslow M J, Salman A D. Twin screw granulation using conveying screws: Effects of viscosity of granulation liquids and flow of powders. Powder Technology, 2013; 238: 77–90.

Qi F L, Heindel T J, Wright M M. Numerical study of particle mixing in a lab-scale screw mixer using the discrete element method. Powder Technology, 2017; 308: 334–345.

Hu Y, Dai L, Pi Y. Theories and calculation of the auger-type conveyer. Journal of Nanchang University (Engineering and Technology), 2000; 22(4): 29–33, 91. (in Chinese)

Shao X, Wang P. The design and calculation of screw conveyor and its application in pulp and paper industry. China Pulp and Paper Industry, 2013; 34(20): 44–47. (in Chinese)

Liu Y, Li Y, Li F, Wang T. Key factors for the design and manufacture of screw conveyer for the production of PVC. Polyviny Chloride, 2008; 36(7): 36–37.

Orefice L, Khinast J G. DEM study of granular transport in partially filled horizontal screw conveyors. Powder Technology, 2017; 305: 347–356.

Hou L, Ling B, Wang S. Kinetics of color degradation of chestnut kernel during thermal treatment and storage. Int J Agric & Biol Eng, 2015; 8(4): 106–115.

Wang S, Yue J, Tang J, Chen B. Mathematical modelling of heating uniformity for in-shell walnuts subjected to radio frequency treatments with intermittent stirrings. Postharvest Biology and Technology, 2005; 35(1): 97–107.

Zhou L, Wang S. Verification of radio frequency heating uniformity and Sitophilus oryzae control in rough, brown, and milled rice. Journal of Stored Products Research, 2016; 65: 40–47.

Zhou L, Wang S. Industrial-scale radio frequency treatments to control Sitophilus oryzae in rough, brown, and milled rice. Journal of Stored Products Research, 2016; 68: 9–18.

Wang S, Yue J, Chen B, Tang J. Treatment design of radio frequency heating based on insect control and product quality. Postharvest Biology and Technology, 2008; 49(3): 417–423.

Wang S, Monzon A, Johnson J A, Mitcham E J, Tang J. Industrial-scale radio frequency treatments for insect control in walnuts I: Heating uniformity and energy efficiency. Postharvest Biology and Technology, 2007; 45(2): 240–246.

Jiao S, Johnson J A, Tang J, Wang S. Industrial-scale radio frequency treatments for insect control in lentils. Journal of Stored Products Research, 2012; 48: 143–148.

Pan L, Jiao S, Gautz L, Tu K, Wang S. Coffee bean heating uniformity and quality as influenced by radio frequency treatments for postharvest disinfestations. Transactions of the ASABE, 2012; 55(6): 2293–2300.

Gao M, Tang J, Wang Y, Powers J, Wang S. Almond quality as influenced by radio frequency heat treatments for disinfestation. Postharvest Biology and Technology, 2010; 58(3): 225–231.

Hansen J D, Drake S R, Watkins M A, Heidt M L, Anderson P A, Tang J. Radio frequency pulse application for heating uniformity in postharvest codling moth (Lepidoptera: Tortricidae) control of fresh apples (Malus domestica Borkh). Journal of Food Quality, 2006; 29(5): 492–504.

Yan R, Huang Z, Li R, Zhu H, Ling B, Wang S. Temperature measurement and analysis of postharvest agricultural products associated with thermal disinfestations. Int J Agric & Biol Eng, 2013; 6(2): 87–94.

Chen L, Wang K, Li W, Wang S. Simulation and validation of radio frequency heating with conveyor movement. Journal of Electromagnetic Waves and Applications, 2015; 30(4): 472–490.

Guo W, Wang S, Tiwari G, Johnson J A, Tang J. Temperature and moisture dependent dielectric properties of legume flour associated with dielectric heating. LWT - Food Science and Technology, 2010; 43(2): 193–201.

Jin Z, Wang S, Han P. Frequency, moisture and temperature-dependent dielectric properties of maize. Journal of China Agricultural University, 2011; 16(4): 141–147. (in Chinese)

Zhang S, Zhou L, Ling B, Wang S. Dielectric properties of peanut kernels associated with microwave and radio frequency drying. Biosystems Engineering, 2016; 145: 108–117.




Copyright (c) 2019



2023-2026 Copyright IJABE Editing and Publishing Office