Reverse design and tests of vegetable plug seedling pick-up mechanism of planetary gear train with non-circular gears

Zhifang Zhu, Guohuan Wu, Bingliang Ye, Yongchang Zhang

Abstract


In the previous research, the seedling pick-up mechanism of the planetary gear train with incomplete eccentric circular gear and non-circular gears for vegetable plug seedlings still has two shortcomings. One is that not enough seedling pick-up depth leads to a low success ratio of seedling pick-up at high rotation speeds, the other is that the smaller seedling pushing angle results in poor seedling pushing effect. Therefore, the reverse design of the seedling pick-up mechanism based on its motion trajectory was carried out. The local trajectory of seedling pick-up and seedling pushing sections was adjusted to obtain the theoretical motion trajectory of the seedling pick-up mechanism. The cubic non-uniform B-spline curve was used to fit the adjusted trajectory. A novel seedling pick-up mechanism of the planetary gear train with non-circular gears was proposed, including three combined non-circular gears, four non-circular gears, one planetary carrier, and two seedling pick-up arms. The reverse design model of the mechanism was established. The analysis and design software of the mechanism was developed to obtain the mechanism parameters meeting design requirements. The virtual prototype of the mechanism was established and its physical prototype was manufactured. Through the virtual motion simulation and high-speed photographic kinematics bench tests of the mechanism, the kinematic model and results of reverse design of the mechanism were verified, with the kinematic performances of the mechanism prototype studied. The seedling pick-up tests of the mechanism were conducted in the laboratory. The success ratios of seedling pick-up were 94.2%, 95.6% and 90.2% while the seedling pick-up efficiencies of the mechanism were 60, 80 and 100 plants per minute per row, respectively. Besides, the seedling pushing effect was improved mush because of the greater seedling pushing angle. The seedling pick-up mechanism through revise design is of high value to be applied in the practical vegetable plug seedling transplanters.
Keywords: vegetable plug seedling, seedling pick-up mechanism, non-circular gear, reverse design, virtual simulation, seedling pick-up tests
DOI: 10.25165/j.ijabe.20231602.7423

Citation: Zhu Z F, Wu G H, Ye B L, Zhang Y C. Reverse design and tests of vegetable plug seedling pick-up mechanism of planetary gear train with non-circular gears, China. Int J Agric & Biol Eng, 2023; 16(2): 96-102.

Keywords


vegetable plug seedling, seedling pick-up mechanism, non-circular gear, reverse design, virtual simulation, seedling pick-up tests

Full Text:

PDF

References


Zhang Z H. The prominent problems and countermeasures in the development of modern vegetable industry in China. Chinese Vegetable, 2014; 8: 1-6. (in Chinese)

Parish R L. Current developments in seeders and transplanters for vegetable crops. Hort Technology, 2005; 15(2): 346-351.

Li B, Gu S, Chu Q, Yang Y L, Xie Z J, Fan K J, et al. Development of transplanting manipulator for hydroponic leafy vegetables. Int J Agric & Biol Eng, 2019; 12(6): 38-44

Jin X, Cheng Q, Zhao B, Ji J T, Li M Y. Design and test of 2ZYM-2 potted vegetable seedlings transplanting machine. Int J Agric & Biol Eng, 2020; 13(1): 101-110.

Liu N C, Yang C W, Liu B L, Jiang H, Wu S H, Huang H. Development of automatic single pendulum vegetable pot seedling picking and feeding system. Transactions of the CSAE, 2020; 36(22): 87-95.(in Chinese)

Jin X, Ji J T, Liu W X, He Y K, Du X W. Structural optimization of duckbilled transplanter based on dynamic model of pot seedling movement. Transactions of the CSAE, 2018; 34(9): 58-67. (in Chinese)

Shaw L.N. Removing and handling modular vegetable seedlings from nursery trays. Proceedings of Florida State Horticultural Society, 1999; 112: 153-155.

Konosuke Tsuga. Development of fully automatic vegetable transplanter. Japan Agricultural Research Quarterly, 2000; 34(1): 21-28.

Kang T G, Kim S W, Kim Y K, Lee S H, Jun H J, Choi II S, et al. Analysis of pick-up mechanism for automatic transplanter (I). Journal of Agriculture & Life Science, 2017; 51(1):187-192.

Choi W C, Kim D C, Ryu I H, Kim K U. Development of seedling pick-up device for vegetable transplants. Transaction of ASAE, 2001; 45(1): 13-19．

Zhao Y, Liu X, Xue X L, Zhang W X, Shan Y Y, Zhou M L. Optimal design and experiment of fully-automated potted eggplant seedling transplanting mechanism. Transactions of the CSAM, 2018; 49(5): 152-160. (in Chinese)

Yin D Q, Wang J Z, Zhou M L, Yang Y C, Wang J W. Optimal design and experiment of vegetable potted seedlings pick-up mechanism for exploring and picking-pushing plugs. Transactions of the CSAM, 2019; 50(10): 64-71. (in Chinese)

Yuan T, Wang D, Wen Y S, Zhu S S, Chen Y, Tan Y Z. Design and experiment of seedlings unloading mechanism based on methods of air-blowing and vibration for vegetable transplanter. Transactions of the CSAM, 2019; 50(10): 80-87. (in Chinese)

Zhao X, Zhang X S, Wu Q P, D L, Chen J. Research and experiment of a novel flower transplanting device using hybrid-driven mechanism. Int J Agric & Biol Eng, 2020; 13(2): 92-100.

Sun L, Shen J H, Zhou Y Z, Ye Z Z, Yu G H, Wu C Y. Design of non-circular gear linkage combination driving type vegetable pot seedling transplanting mechanism. Transactions of the CSAE, 2019; 35(10): 26-33. (in Chinese)

Ye B L, Zeng G J, Deng B, Yang C L, Liu J K, Yu G H. Design and tests of a rotary plug seedling pick-up mechanism for vegetable automatic transplanter. Int J Agric & Biol Eng, 2020; 13(3): 70-78.

Ye B L, Yi W M, Yu G H, Gao Y, Zhao X. Optimization design and test of rice plug seedling transplanting mechanism of planetary gear train with incomplete eccentric circular gear and non-circular gears. Int J Agric & Biol Eng, 2017; 10(6): 43-55.

Yu Y X, Liu J K, Ye B L, Yu G H, Jin X J, Sun L, et al. Design and experimental research on seedling pick-up mechanism of planetary gear train with combined non-circular gear transmission. Chinese Journal of Mechanical Engineering, 2019; 32(3): 42-54. (in Chinese)

Ye B L, Zeng G J, Deng B, Yang C L, Liu J K, Yu G H. Design and tests of a rotary plug seedling pick-up mechanism for vegetable automatic transplanter. Int J Agric & Biol Eng, 2020; 13(3): 70-78.

Wu G H. Optimization design and test on rice pot-seedling transplanting mechanism with non-circular planetary gears. Hangzhou: Thesis of Zhejiang Sci-Tech University, 2016; 15p.

Wang L, Sun L, Huang H M, Yu Y X, Yu G H. Design of clamping-pot-type planetary gear train transplanting mechanism for rice wide–narrow-row planting. Int J Agric & Biol Eng, 2021; 14(2): 62-71.

Wang L, Sun L, Xu Y D, Yu G H, Zhang W, Zheng J. Design method of transplanting mechanism of planetary gear train based on spatial trajectory. Transactions of the CSAM, 2021; 52(7): 51-59.

Li G, Ying K Y, Zhang J Z, Li J F, Yu G H, Ye Y S, et al. Computation method of non-circular gear based on seedling needle tip point’s static trajectory in transplanting mechanism. Chinese Journal of Mechanical Engineering, 2016; 52(1): 64-71. (in Chinese)

Li H, Chen B B, Cao W B, Ma X X, Zhao H Z. Reverse design and analysis of automatic pick-up mechanism for tomato plug seedlings. International Agricultural Engineering Journal, 2017; 26(1): 126-134.

Wu G H, Yu G H, Zhou H L, Ge Y J, Ye A K, Wang L. Reverse design and tests of three-arms rotary rice seedling transplanting mechanism. Transactions of the CSAE, 2022; 53(7): 84-91,149.(in Chinese)

Wu G H, Yu G H, Ye B L, et al. Forward-reverse design method for rice potted-seedling transplanting mechanism with compound planetary gear train . Transactions of the CSAE, 2020; 51(2): 85-93, 102. (in Chinese)




Copyright (c) 2023 International Journal of Agricultural and Biological Engineering

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

2023-2026 Copyright IJABE Editing and Publishing Office