Effects of moisture content and feed rate on milling characteristics of wild apricot pits (Prunus armeniaca L.)

A. E. Kate, U. C. Lohani, N. C. Shahi, J. P. Pandey, A. Sarkar, Khan Chand

Abstract


Milling with decortication of wild apricot pits was done in wild apricot pit decorticator working on the principle of “impact and compression

Keywords


fwild apricot pit, milling characteristics, decortication efficiency, moisture content, husk percentage, broken percentage, output capacity

Full Text:

PDF

References


Chadha K L. Handbook of horticulture. Directorate of Information and Publications of Agriculture-ICAR, New Delhi, 17th edition, 2009; pp 132-135.

Anonymus. Annual report of “Directorate of horticulture

Anon. Properties of apricot seed oil. Available at: www.shea-butter.com. Newsletter, 12th edition, March 2003.

Gutfinger T, Ramano S, Leten A. Characterization of lipids from seeds of Rosaceae family. Journal of Food Science, 1972; 37: 938-940.

Guner M, Vatandas M, Dursun E. Determination of cracking characteristics of some variety of apricot stones. Journal of Agricultural Sciences, 1999; 5(1): 95-103.

Gupta A, Sharma P C. Standardization of technology for extraction of wild apricot kernel oil at semi-pilot scale. Biological Forum

Lestienne I, Buisson M, Lullien-Pellerin V, Picq C, Trèche S. Losses of nutrients and anti-nutritional factors during abrasive decortication of two pearl millet cultivars (Pennisetum glaucum). Food Chemistry, 2007; 100(2007): 1316-1323.

Nejad M K, Tabil L G, Mortazavi A, Kordi S A. Effect of drying methods on quality of pistachio nuts. Drying Technology, 2003; 21(5): 821-838.

Olaniyan A M, Oje K. Some aspect of the mechanical properties of shea nut. Biosystems Engineering, 2002; 81: 413-420.

Altuntas E, Erkol M. The effects of moisture content, compression speeds, and axes on mechanical properties of walnut cultivars. Food and Bioprocess Technology, 2011; 4(7): 1288-1295.

Kate A E, Lohani U C, Shahi N C, Pandey J P. Optimization of machine parameters of wild apricot pit decorticator using Response Surface Methodology. International Agricultural Engineering Journal, 2013; 22(1): 27-33.

Lohani U C, Pandey J P, Shahi N C. Effect of degree of polishing on milling characteristics and proximate compositions of barnyard millet (Echinochloa frumentacea). Food and Bioprocess Technology, 2011; 5(3): 1113-1119.

Khush G S, Paule C M, Dela Cruz N M. Rice grain quality evaluation and improvement at IRRI. in: Proceedings of the workshop on Chemical Aspects of Rice Grain Quality. Los Banos, IRRI, Philippines, 1979; pp 21-31.

Lai F S, Webb B D, Bollich C N, Afework S, Pomeranz Y. Rice garain hardness and its relationship to some milling, cooking and processing characteristics. Cereal Chemistry, 1985; 63(1): 27-30.

Surya Prakash D S P L. Design, development and testing of Jatropha fruit decorticator. Unpublished Master thesis, Department of Farm Machinery and Power Engineering, G.B.P.U.A and T, Pantnagar, India, 2006.

Dharmaraj U, Ravi R, Malleshi N G. Optimization of process parameters for decortication of finger millet through response surface methodology. Food and Bioprocess Technology, 2013; 6(1): 207-216.

Sahay K M, Singh K K. Unit operations of agricultural processing. 2nd edition, Vikas publishing house pvt. Ltd, 2001.

Mohapatra D, Bal S. Optimization of polishing conditions for long grain Basmati rice in a laboratory abrasive mill. Food and Bioprocess Technology, 2010; 3(3): 466-472.

Shobana S, Malleshi N G. Preparation and functional properties of decorticated finger millet (Eleusine coracana). Journal of Food Engineering, 2007; 79(2): 529-538.

Braga G C, Couto S M, Hara T, Neto J T P A. Mechanical behaviour of macadamia nut under compression loading. Journal of Agricultural Engineering Research, 1999; 72(3):

-245.

Guner M, Dursun E, Dursun I G. Mechanical behaviour of hazelnut under compression loading. Biosystems Engineering, 2003; 85(4): 485-491.

Koyuncu M A, Ekinci K, Gun A. The effects of altitude on fruit quality and compression load for cracking of walnuts (Juglans regia L.). Journal of Food Quality, 2004a; 27(6): 407-417.

Koyuncu M A, Ekinci K, Savran E. Cracking

characteristics of walnut. Biosystems Engineering, 2004b; 87(3): 305-311.

Aktas T, Polat R, Atay U. Comparison of mechanical properties of some selected almond cultivars with hard and soft shell under compression loading. Journal of Food Process Engineering, 2007; 30(6): 773-789.

Sharifian F, Derafshi M H. Mechanical behavior of walnut under cracking conditions. Journal of Applied Sciences, 2008; 8(5): 886-890.




Copyright (c)



2023-2026 Copyright IJABE Editing and Publishing Office