Model construction for field operation machinery selection and configuration in wheat-maize double cropping system

Fu Zhang, Tianhua Chen, Shuai Teng, Jiajia Wang, Ruiliang Xu, Zhijun Guo

Abstract


In order to scientifically and reasonably select the field operation machinery in wheat-maize double cropping system, first, the selection evaluation index system was constructed through the existing national standards and industry standards. Then the selection evaluation model was established based on the improved fuzzy comprehensive evaluation method. And the method of subjective weight and objective weight was used to overcome the drawbacks of the previous single weighting method that could not take into account the subject and object information of each indicator, and the weight value of each index was obtained in the evaluation system. Finally, the tillage process was used as an example, the field experiment was carried out to obtain the evaluation index value, and the model of selection evaluation was verified. The selection results of moldboard plough and rotary cultivator were as follows: the order of the comprehensive evaluation results of the moldboard plough results was ranked from high to low as 1LFK-435 (IIM), 1LFK-535 (IM), 1LF-342 (IIIM), 1LFT-445 (IVM), 1LFT-545 (VM), and the best machine type of the moldboard plough was IIM; the order of the comprehensive evaluation results of the rotary cultivator was ranked from high to low as 1GQKGN-240 (IIIR), 1GKNSM-250 (IVR), 1GKN-230K (IR), 1GKN-250K (IIR), 1GQKGN-220 (VR), and the optimal model of the rotary cultivator was IIIR. The experimental results showed that the results obtained by the evaluation model were in agreement with the local actual situation. The evaluation model will provide a scientific method for the selection of wheat and maize double cropping field operation machinery.
Keywords: wheat-maize double cropping system, agricultural machinery, parts selection mode, evaluation system, fuzzy comprehensive evaluation method, combination weight
DOI: 10.25165/j.ijabe.20211404.6383

Citation: Zhang F, Chen T H, Teng S, Wang J J, Xu R L, Guo Z J. Model construction for field operation machinery selection and configuration in wheat-maize double cropping system. Int J Agric & Biol Eng, 2021; 14(4): 82–89.

Keywords


wheat-maize double cropping system, agricultural machinery, parts selection mode, evaluation system, fuzzy comprehensive evaluation method, combination weight

Full Text:

PDF

References


Li G G. Research on the application of advanced agricultural technology in agricultural machinery. Agriculture of Henan, 2016; 23: 125–126. (in Chinese)

Yang C, Mi L, Gao P F, Chai Z H. On the present situation and development trend of agricultural mechanization in China. China Southern Agricultural Machinery, 2019; 50(7): 19. (in Chinese)

Du Y F, Fu S H, Mao E R, Zhu Z X, Li Z. Development situation and prospects of intelligent design for agricultural machinery. Transactions of the CSAM, 2019; 50(9): 1–17. (in Chinese)

Liu M H. Research on the present situation and development mode of agricultural mechanization in China. Nong Min Zhi Fu Zhi You, 2018; 15: 164. (in Chinese)

Shi X H. Current situation and countermeasures of agricultural mechanization in agricultural engineering. South China Agriculture, 2018; 12(21): 146–147. (in Chinese)

Ning B Q, Peng W S, Guo S Q, Shan Z P. Research on comprehensive evaluation of agricultural machinery based on dynamic combination weighting. Journal of Agricultural Mechanization Research, 2015; 37(7): 79–82, 96. (in Chinese)

Gao Q S, Cao G Q, Zhu M, Yang Y T. Research on selection system of total tiller on facility agriculture. Journal of Chinese Agricultural Mechanization, 2013; 34(6): 148–152, 158. (in Chinese)

Pan R Q, Liu J, Song D Y. Agricultural land classification based on fuzzy comprehensive analysis. Transactions of the CSAE, 2014; 30(18): 257–265. (in Chinese)

Liu G M, Yang J S, He L D, Yu S P, Yao R J, Lyu Z Z. Fuzzy comprehensive evaluation based assessment of soil alkaline desertification in typical arid area of Xinjiang. Transactions of the CSAE, 2011; 27(3): 1–5. (in Chinese)

Yang J Y, Ou C, Li Q, Zhang X, Zhang C, Zhu D H. Fuzzy synthetic evaluation of soil nutrients in cultivated land based on cloud model in Da'an City, Jilin Province. Transactions of the CSAM, 2018; 49(1): 251–257. (in Chinese)

Yue T L, Peng B Z, Yuan Y H, Gao Z P, Zhang H, Zhao Z H. Modeling of aroma quality evaluation of cider based on principal component analysis. Transactions of the CSAE, 2007; 23(6): 223–227. (in Chinese)

Liu B, Jiao G. Evaluation method of suitability for agricultural machinery. Transactions of the CSAM, 2006; 37(9): 100–103+82. (in Chinese)

Zhao H S, Chen C, Hu Z Q, Li L M. Evaluation of intensive urban land use and analysis of obstacle factors in northern slope of Tianshan mountains. Transactions of the CSAE, 2018; 34(20): 258–266. (in Chinese)

Hu W Z, He K, Jin C Q, Geng D Y, Zhang G H, Lu X F. FMECA method based on fuzzy comprehensive evaluation. Transactions of the CSAM, 2018; 49(S1): 332–337. (in Chinese)

Wang J C, Xi L, Zhao X L, Ma X M, Cao D L, Xu X. Data normalization of leaf color based on fuzzy comprehensive evaluation for visualization model. Transactions of the CSAE, 2011; 27(11): 155–159. (in Chinese)

Wu P, Jia C H, Fan S Y, Sun Y G. Principal component analysis and fuzzy comprehensive evaluation of fruit quality in cultivars of cherry. Transactions of the CSAE, 2018; 34(17): 291–300. (in Chinese)

Yang Y, Pan Y J, Liang S C. Fuzzy comprehensive evaluation of auto-driven micro-cultivator quality. Transactions of the CSAE, 2008; 24(2): 140–144. (in Chinese)

Gong Y, Zhang X, Liu Y, Wang G, Chen X, Chen X B. Comprehensive evaluation method for applicability of plant protection machinery based on analytic hierarchy process. Transactions of the CSAM, 2016; 47(9): 73–78.

Zhang W P, Zheng Z A, Wang G, Gao Z J, Yang B L, Wang J C. Establishment of evaluation model for tobacco field machinery selection. Transactions of the CSAE, 2015; 31(S1): 102–109. (in Chinese)

Fu Q, Yang G L, Jin J L. Selection of agricultural machinery types and based on PPC model. Transactions of the CSAM, 2003; 34(1): 101–103. (in Chinese)

Kang H Y, Li Z, Wei Z K, Li C X. Mode choice and optimization of harvester based on second–class indefinite comprehensive judgment. Journal of Agricultural Mechanization Research, 2005; 27(1): 100–102. (in Chinese)

Wang Q Y, Wang F L. Application of grey correlation degree analysis method in the evaluation of agricultural equipment selection. Journal of Agricultural Mechanization Research, 2014; 36(8): 46–48, 58. (in Chinese)

Xiang X, Luo Y, Cheng H S, Shen Yu J, Wang Y C, Zhang Y H. Biogas engineering technology screening based on analytic hierarchy process and fuzzy comprehensive evaluation. Transactions of the CSAE, 2014; 30(18): 205–212. (in Chinese)

Fang Y X, Yang P L, Song S L, Du J, Xue Y D, Su Y P. Secondary fuzzy comprehensive evaluation model for ecosystem health of irrigation district and its application. Transactions of the CSAE, 2011; 27(11): 199–205. (in Chinese)

Huang G Q, Han L J, Liu X, Yang Z L. Establish of evaluation system for integrated agricultural mechanization engineering technology. Transactions of the CSAE, 2012; 28(16): 74–79. (in Chinese)

GBT 14225-2008. Mouldboard plough. 2008; 17p. (in Chinese)

NYT 742-2003. Operation quality of mouldboard plough. 2003; 3p. (in Chinese)

DGT 087-2019. Mouldboard plough. 2019; 4p. (in Chinese)

GBT 5668-2017. Rotary tiller. 2017; 7p. (in Chinese)




Copyright (c) 2021 International Journal of Agricultural and Biological Engineering

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

2023-2026 Copyright IJABE Editing and Publishing Office