Optimization of hot-air microwave combined drying control system based on air outlet temperature and humidity monitoring

Fujie Zhang, Anqier Hu, Ruikai Song, Lixia Li

Abstract


Microwave drying is one of the most important drying methods in agriculture. The online measurement and control of material dried, as a challenging research issue, is helping to improve the drying quality of the final product and the energy utilization efficiency of microwave dryers. In order to realize the online measurement of temperature in microwave drying, a detection strategy was based on the temperature and humidity monitoring at the air outlet of coupling hot air and microwave drying method. LabVIEW programming software was employed to collect the temperature and humidity signal value at the outlet of the dryer to estimate the drying degree of the material. According to the amount of moisture removal in real-time, the microwave input power was adjusted gradually in the microwave drying process. Taking potato as material dried, the microwave power of microwave and hot air coupling drying is monitored to realize the real-time regulation. The results showed that the total color difference value of the product of 3.09, the rehydration ratio of 2.92, the unit energy consumption of 17 419.35 kJ/kg, and the drying rate of 0.442 g/s were obtained. The minimum comprehensive weighted score of the product was 26.36. Compared with the orthogonal experiment, the optimal drying process was obtained as the total color difference value of the product of 2.84, the rehydration ratio of 3.01, the unit energy consumption of 17 419.35 kJ/kg, and the drying rate of 0.397 g/s. The minimum comprehensive weighted score of the product was 20.67, and the difference was not significant. The control strategy not only solves the non-uniform phenomenon of drying, and makes the microwave drying real-time and continuous, but also improves the drying efficiency and quality.
Keywords: microwave, drying, temperature, humidity, control, power, potato
DOI: 10.25165/j.ijabe.20211404.6366

Citation: Zhang F J, Hu A Q E, Song R K, Li L X. Optimization of hot-air microwave combined drying control system based on air outlet temperature and humidity monitoring. Int J Agric & Biol Eng, 2021; 14(4): 255–261.

Keywords


microwave, drying, temperature, humidity, control, power, potato

Full Text:

PDF

References


Wang S L. Recent development of microwave power uses in the food processing industry and adopt measures of development at home. Transactions of the CSAE, 1993; 9(1): 43–49. (in Chinese)

Zhang M, Tang J, Mujumdar A S, Wang S. Trends in microwave related drying of fruits and vegetables. Trends in Food Science and Technology, 2006; 17(10): 524–534.

Ji F, Li Z F, Li J, Song F H, Xu W X. Research on characteristics of combined microwave-hot air drying of burdock based on temperature control. Science and Technology of Food Industry, 2015; 36(20): 284–288. (in Chinese)

Ju H Y, Zhao H Y, Yu X L, Zhang W P, Wang H, Gao Z J, et al. Design and experiment of box type hot air drier for fruit and vegetables based on temperature and humidity control. Food＆Machinery, 2020; 36(7): 97–103. (in Chinese)

Zhang B Y, Zhang Z G, Zhang F J. A coupled hot air and microwave drying system with microwave power controlled. Journal of Agricultural Mechanization Research, 2017; 39(7): 240–243. (in Chinese)

Koné K Y, Druon C, Gnimpieba E Z, Delmotte M, Duquenoy A, Laguerre J C. Power density control in microwave assisted air drying to improve quality of food. Journal of Food Engineering, 2013; 119(4): 750–757.

Ju H Y, El-Mashad H, Fang X M, Pan Z L, Xiao H W, Liu Y H, et al. Drying characteristics and modeling of yam slices under different relative humidity condition. Drying Technology, 2016; 34(3): 296–306.

Li Z F, Vijaya Raghavan G S, Wang N, Gariepy Y. Real-time, volatile-detection-assisted control for microwave drying. Computers and Electronics in Agriculture, 2009; 69(2): 177–184.

Dai J W, Rao J Q, Wang D, Xie L. Process-based drying temperature and humidity integration control enhances drying kinetics of apricot halves. Drying Technology, 2015; 33(3): 365–376.

Guo L M, Zhang Q, Zhao X M, Zou S P, Liu L. Study on the drying technology and drying characteristics of solar-dryer for high-quality dried apricot. Xinjiang Agricultural Sciences, 2008; 45(6): 1102–1109. (in Chinese)

Xiao H W, Pang C L, Wang L H, Bai J W. Drying kinetics and quality of Monukka seedless grapes dried in an air-impingement jet dryer.

Biosystems Engineering, 2010; 105(2): 233–240.

Xiong S B, Zhao S M. High temperature and high humidity drying of artificially formed rice. Food Science, 2000; 21(8): 31–33. (in Chinese)

Zhao S M, Liu Y M, Xiong S B, Tan R C. Water diffusion properties of instant rice noodles under high temperature and high moisture drying condition. Journal of Huazhong Agricultural University, 2003; 22(3): 285–288. (in Chinese)

Jia L, Kong J X, Liu Y H, Wu Y, Xiong S B, Zhao S M. Studies on high temperature and humidity drying of velvetbean. Science and Technology of Food Industry, 2011; 33(12): 251–254. (in Chinese)

Zhao S M, Tan R C, Liu Y M, Xiong S B. Mathematical model of instant rice noodles during the high temperature and high moisture drying process. Food Science, 2003; 24(7): 52–54. (in Chinese)

Wu M, Duan H, Wang Z W, Su Y, Zheng Z A, Duan Q. Design and experiment of infrared-hot air combined dryer based on temperature and humidity control. Transactions of the CSAM, 2020; 51(S1): 483–492. (in Chinese)

Zhou H M. Study on microwave drying process of carrot based on humidity controlled method. Master dissertation. Wuxi: Jiangnan University, 2017; 76p. (in Chinese)

Yu H M, Zuo C C, Xie Q J. Parameter optimization for microwave coupled with hot air drying process of hawthorn slices using response-surface methodology. Int J Agric & Biol Eng, 2015; 8(2): 121–134.

Curcio S, Aversa M, Calabrò C, Iorio G. Simulation of food drying: FEM analysis and experimental validation. Journal of Food Engineering, 2008; 87(4): 541–553.

Li K. Study on dehydration dynamics model and characteristic mechanism for Chinese medicinal materials of rhizome by hot air drying. Master dissertation. Kunming: Yunnan Normal University, 2020; 85p. (in Chinese)

Hui J, Li Z F, Li J, Xu W X. Effect of flow rate on humidity and drying characteristics in microwave drying process. Acta Agriculture Zhejiangensis, 2016; 28(6): 1061–1068. (in Chinese)

Design Department of Shanghai Printing and Dyeing Machinery Factory. Basic knowledge of hot air drying (I). China Dyeing & Finishing, 1977; 3: 21–30. (in Chinese)

Ju H Y, Zhao S H, Mujumdar A S, Zhao H Y, Duan X, Zheng Z A, et al. Step-down relative humidity convective air drying strategy to enhance drying kinetics, efficiency and quality of American ginseng root (Panax quinquefolium). Drying Technology, 2020; 38(7): 903–916.

Liu M J, Wu B G, Pan Z L, Ma H L. Study on the drying characteristics and quality of carrot dices with different drying methods. The Food Industry, 2018; 39(1): 158–163. (in Chinese)

Tao J C, Wu J M. New study on determining the weight of index in synthetic weighted mark method. Systems Engineering-Theory & Practice, 2001; 8: 43–48. (in Chinese)

Yi L, Yang W, Wang C. Drying conditions and drying model of papaya slices during combined microwave-convective hot air dehydration. Science and Technology of Food Industry, 2017; 38(9): 221–227. (in Chinese)

Shi Q L, Zheng Y Q, Zhao Y. Mathematical modeling on thin-layer heat pump drying of yacon (Smallanthus sonchifolius) slices. Energy Conversion and Management, 2013; 71: 208–216.

Adam F. Drying kinetics and quality of beetroots dehydrated by combination of convective and vacuum-microwave methods. Journal of Food Engineering, 2010; 98(4): 461–470.

Medeni M. Drying shrinkage and rehydration characteristics of kiwifruits during hot air and microwave drying. Journal of Food Engineering, 2001; 48(2): 177–182.

Gong X J. Thermodynamic analysis of heat and moisture transfer and crossing of material drying system. Master dissertation. Lanzhou University of Technology, 2017; 51p.




Copyright (c) 2021 International Journal of Agricultural and Biological Engineering

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

2023-2026 Copyright IJABE Editing and Publishing Office