Numerical simulation and analysis of mechanized suppression process of seedbed with whole plastic film mulching on double ridges
Abstract
Keywords: seedbed, whole plastic film mulching, double ridges, mechanized suppression, discrete element method, numerical simulation, parameter optimization
DOI: 10.25165/j.ijabe.20211401.5866
Citation: Dai F, Song X F, Zhao W Y, Sun B G, Shi R J, Zhang Y. Numerical simulation and analysis of mechanized suppression process of seedbed with whole plastic film mulching on double ridges. Int J Agric & Biol Eng, 2021; 14(1): 142–150.
Keywords
Full Text:
PDFReferences
Zhou L M, Jin S L, Liu C A, Xiong Y C, Si J T, Li X G, et al. Ridge-furrow and plastic-mulching tillage enhances maize-soil interactions: opportunities and challenges in a semiarid agroecosystem. Field Crops Research, 2012; 126: 181–188.
Gan Y T, Siddique K H, Turner N C, Li X G, Niu J Y, Yang C, et al. Chapter Seven-Ridge-furrow mulching systems-an innovative technique for boosting crop productivity in semiarid rain-fed environments. Advances in Agronomy, 2013; 118(1): 429–476.
Dai F, Zhao W Y, Zhang F W, Ma H J, Xin S L, Ma M Y. Research progress analysis of furrow sowing with whole plastic-film mulching on double ridges technology and machine in northwest rainfed area. Transactions of the CSAM, 2019; 50(5): 1–16. (in Chinese)
Dai F, Zhao W Y, Zhang F W, Wu Z W, Song X F, Wu Y F. Optimization and experiment of operating performance of collector for corn whole plastic film mulching on double ridges. Transactions of the CSAE, 2016; 32(18): 50–60. (in Chinese)
Dai F, Guo W J, Song X F, Shi R J, Zhao W Y, Zhang F W. Design and test of crosswise belt type whole plastic-film ridging-mulching corn seeder on double ridges. Int J Agric & Biol Eng, 2019; 12(4): 88–96.
Liu H J, Han J Y, Chen J Q, Lyu J Q, Zhao S H. Performance simulation and experiment on rigid press wheel for hilly area. Transactions of the CSAE, 2018; 49(11): 114–122. (in Chinese)
Zhao S H, Liu H J, Tan H W, Yang Y Q, Zhang X M. Design and experiment of bidirectional profiling press device for hilly area. Transactions of the CSAE, 2018; 49(11): 114–122. (in Chinese)
Tong J, Zhang Q Z, Chang Y, Li M, Zhang L L, Liu X. Finite element analysis and experimental verification of bionic press roller in reducing adhesion and resistance. Transactions of the CSAE, 2014; 45(7): 85–92. (in Chinese)
Ucgul M, Fielke J M, Saunders C. 3D DEM tillage simulation: validation of a hysteretic spring (plastic) contact model for a sweep tool operating in a cohesionless soil. Soil and Tillage Research, 2014; 144(4): 220–227.
Ucgul M, Fielke J M, Saunders C. Comparison of the discrete element and finite element methods to model the interaction of soil and tool cutting edge. Biosystems Engineering, 2018; 169: 199–208.
Tamas K. The role of bond and damping in the discrete element model of soil-sweep interaction. Biosystems Engineering, 2018; 169: 57–70.
Dai F, Zhao W Y, Shi R J, Zhang F W, Ma H J, Ma M Y. Design and experiment of operation machine for filming and girdle covering on double ridges. Transactions of the CSAM, 2019; 50(6): 130–139. (in Chinese)
Dai F, Zhao W Y, Song X F, Zhang F W, Feng F X. Working process analyses of direct insert hill-device with corn whole plastic-film mulching on double ridges based on EDEM. International Agricultural Engineering Journal, 2017; 26(4): 124–131.
Ucgul M, Fielke J M, Saunders C. Three-dimensional discrete element modelling of tillage: determination of a suitable contact model and parameters for a cohesionless soil. Biosystems Engineering, 2014; 121(2): 105–117.
Zhao Z, Li Y M, Liang Z W, Gong Z Q. DEM simulation and physical testing of rice seed impact against a grain loss sensor. Biosystems Engineering, 2013; 116: 410–419.
Oldal I, Safranyik F. Extension of silo discharge model based on discrete element method. Journal of Mechanical Science & Technology, 2015; 29(9): 3789–3796.
Qi L, Chen Y, Sadek M. Simulations of soil flow properties using the discrete element method (DEM). Computers and Electronics in Agriculture, 2019; 157: 254–260.
Jia H L, Guo H, Guo M Z, Wang L C, Zhao J L, Fan X H. Finite element analysis of performance on elastic press wheel of row sowing plow machine for covering with soil and its experiment. Transactions of the CSAE, 2015; 31(21): 9–16. (in Chinese)
Dai F, Song X F, Zhao W Y, Zhang F W, Ma H J, Ma M Y. Simulative calibration on contact parameters of discrete elements for covering soil on whole plastic film mulching on double ridges. Transactions of the CSAM, 2019; 50(2): 49–56, 77. (in Chinese)
Ucgul M, Saundersa C, Li P L, Lee S H. Analyzing the mixing performance of a rotary spader using digital image processing and discrete element modelling (DEM). Computers and Electronics in Agriculture, 2018; 151: 1–10.
Barr J B, Ucgul M, Desbiolles J M A, Fielke J M. Simulating the effect of rake angle on narrow opener performance with the discrete element method. Biosystems Engineering, 2018; 171: 1–15.
Wang X Z, Zhang S, Pan H B, Zheng Z Q, Huang Y X, Zhu R X. Effect of soil particle size on soil-subsoiler interactions using the discrete element method simulations. Biosystems Engineering, 2019; 182: 138–150.
Zhang S L, Zhao W Y, Dai F, Song X F, Qu J F, Zhang F W. Simulation analysis and test on suppression operation process of ridging and film covering machine with full-film double-furrow. Transactions of the CSAE, 2020; 36(1): 20–30. (in Chinese)
Copyright (c) 2021 International Journal of Agricultural and Biological Engineering
This work is licensed under a Creative Commons Attribution 4.0 International License.