Design and experimental study of seed precise delivery mechanism for high-speed maize planter

Quanwei Liu, Tao Cui, Dongxing Zhang, Li Yang, Yunxia Wang, Xiantao He, Mantao Wang

Abstract


Aiming at improving the seed spacing uniformity of maize planter at high forward speed, a seed precise delivery mechanism driven by electric motor has been developed and evaluated in laboratory. The mechanism was designed to deliver single seed from seed meter to furrow. Seed’s movement from the seed release point in a seed meter to the seed delivery cavity in the belt was analyzed, the mathematical model of seed movement in the seed precise delivery mechanism was established based on seed delivery time analysis. A mechanical prototype was designed and associated control system was developed. The performance contrast experiment was conducted between a traditional seed tube and newly developed seed precise delivery mechanism, and test results indicated that the qualities of feed index of the seed precise delivery mechanism were higher than those of the traditional seed tube delivery mechanism, and the coefficients of variation of the seed precise delivery mechanism were lower than those of the traditional seed tube delivery mechanism when the forward speed of planter was set at 10 km/h, 12 km/h and 14 km/h, respectively. It indicated the seed precise delivery mechanism significantly improved seed spacing uniformity of maize planter compared with the traditional seed tube delivery mechanism.
Keywords: seed precise delivery mechanism, electric motor, seed spacing uniformity, delivery time, mechanical prototype
DOI: 10.25165/j.ijabe.20181104.2802

Citation: Liu Q W, Cui T, Zhang D X, Yang L, Wang Y X, He X T, et al. Design and experimental study of seed precise delivery mechanism for high-speed maize planter. Int J Agric & Biol Eng, 2018; 11(4): 81-87.

Keywords


seed precise delivery mechanism, electric motor, seed spacing uniformity, delivery time, mechanical prototype

Full Text:

PDF

References


Singh R C, Singh G, Saraswat D C. Optimization of design and operational parameters of a pneumatic seed metering device for planting cottonseeds. Biosystems Engineering, 2005; 92: 429–438.

Allen R R, Hollingsworth L D, Thomas J D. Sunflower planting and emergence with coated seed. Trans of the ASAE, 1983; 26: 665–668.

Halderson J L. Planter selection accuracy for edible beans. Trans of the ASAE 1983; 26: 367–371.

Ozmerzi A. Seed distribution performance of the furrow openers used on drill machines. AMA Agric Mech Asia Afr Lat Am, 1986; 17: 32–34.

Panning J W. Seed spacing performance for general purpose and specialty type sugar beet planters. MS Thesis, USA: University of Nebraska, 1997.

Jasa P J, Dickey E C. Tillage factors affecting corn seed spacing. Trans. ASAE, 1982; 25(6): 1516–1519.

Liu J, Cui T, Zhang D X, Yang L, Shi Song. Mechanical-pneumatic Combined Corn Precision Seed-metering device. Transactions of CSAM, 2012; 43(2): 43–47. (in Chinese)

Karayel D, Ozmerzi A. Effect of tillage methods on sowing uniformity of maize. Can Biosyst Eng, 2002; 44: 2.23–2.26.

Shi S, Zhang D X, Yang L, Cui T, Zhang R, Yin X W. Design and experiment of pneumatic maize precision seed meter with combined holes. Transactions of CSAE, 2014; 30(5): 10–18. (in Chinese)

Brooks D, Church B. Drill performance assessments: changed approach. Br Sugar Beet Rev, 1987; 50: 13–15.

Kachman S D, Smith, J A. Alternative measures of accuracy in plant spacing for planters using single seed metering. Trans of the ASAE, 1995; 38(2): 379–387

Ozmerzi A, Karayel D. The effect of the tooth harrow covers of the grain seeders on seed distribution in soil. J. Univ. Akdeniz, Faculty Agricult, 1999; 11: 75–79.

Parish R L, Bracy R P. Metering non-uniform vegetable seed. Hort Tech, 1998; 8: 69–71.

Karayel D, Wiesehoff M, Ozmerzi A. Laboratory measurement of seed drill seed spacing and velocity of fall of seeds using high-speed camera system. Comput Electron Agr, 2006; 50: 89–96.

Ozmerzi A, Karayel D, Topakci M. Effect of sowing depth on precision seeder uniformity. Biosyst Eng, 2002; 82: 227–230.

Erbach D C, Wilkins D E, Lovely W G. Relationships between furrow opener, maize plant spacing, and yield. Agron J, 1972; 64: 702–704.

Moody F H, Hancock J H, Wilkerson J B. Evaluating planter performance-cotton seed placement accuracy. ASAE Paper No. 031146, 2003; St Joseph, Michigan, USA: ASAE.

Ju X Q. Seed tube analysis of DOHN DEERE 7000 type precision seeder. Transactions of the CSAM 1981; 78–82. (in Chinese)

Liu L J, Yang H. 3D reverse engineering design on seed tube based on Geomagic Design software. Transactions of the CSAE, 2015; 31(11): 40–45. (in Chinese)

Gao R. The study of microcomputer design method on the seed tube of precision plant. Transactions of the CSAE, 1990; 6(4): 60–66. (in Chinese)

He J L, Yang T, Qiu Z R. Design and research of the curve of seed tube in 2BQYF-6A direct seeder. J Shanxi Agric Univ, 2000; 20: 389–391. (in Chinese)

Che J Z, Yu L, Li Q Y. Design and study on the double-disk no-till planter for wheat. Journal of Shandong University of Technology: Natural Science Edition, 2011; 25: 25–28. (in Chinese)

McGrego K C, Mutcher C K. Soil loss from conservation tillage for sorghum. Transactions of the ASAE 1992; 35: 1841–1845.

Zhang X R, He J, Li H W, Li W Y. Design and experiment on the driving disc of anti-blocking unit for no-tillage planter. Transactions of the CSAE 2009; 25(9): 117–121. (in Chinese)




Copyright (c) 2018



2023-2026 Copyright IJABE Editing and Publishing Office