Analysis and experiment on cutting performances of high-stubble maize stalks

Zhao Jiale, Huang Dongyan, Jia Honglei, Zhuang Jian, Guo Mingzhuo

Abstract


In the cold areas of Northeast China, maize high-stubble cutting is a novel stalk conservation tillage method, in which the maize stalks are under a unilaterally-fixed no-support cutting status. Thus, reducing the cutting resistance and power consumption of maize stalks under this status is very significant for development of high-efficiency high-stubble cutting devices. Based on a self-designed testing system that highly restored the maize high-stubble cutting conditions and by means of experimental design and mathematic statistics, the effects of working parameters (blade angle, blade shape, cutting speed and cutting angle) on the maximum cutting resistance and power consumption were studied. By analyzing stress conditions during the stalk cutting process, six mathematic models were built to express the relationships between individual factors and the maximum cutting resistance or cutting power consumption. Through model optimization, the parameter combination for optimal cutting performance of maize stalks under unilaterally-fixed no-support cutting status was obtained: blade angle is 18°, blade shape is isosceles triangle, cutting speed is 9.5 m/s, and cutting angle is 75°. Field validation experiments under this parameter combination showed that the maximum cutting resistance was (55.23±3.50) N (declined by 11.04%), and power consumption was (11.41±1.04) J (declined by 16.65%). The research findings can be a reference for the design and development of maize high-stubble cutting devices.
Keywords: cutting performances, blade angle, working parameters, high-stubble, conservation tillage, mechanism analysis, corn
DOI: 10.3965/j.ijabe.20171001.2589

Citation: Zhao J L, Huang D Y, Jia H L, Zhuang J, Guo M Z. Analysis and experiment on cutting performances of high-stubble maize stalks. Int J Agric & Biol Eng, 2017; 10(1): 40-52.

Keywords


cutting performances, blade angle, working parameters, high-stubble, conservation tillage, mechanism analysis, corn

Full Text:

PDF

References


Igathinathane C, Womac A R, Sokhansanj S. Corn stalk orientation effect on mechanical cutting. Biosystems Engineering, 2010; 107(2): 97–106.

Jia H L, Ma C L, Li H Z, Chen Z L. Tillage soil protection of black soil zone in northeast of China based on analysis of conservation tillage in the United States. Transactions of the CSAM, 2010; 41(10): 28–34. (in Chinese)

Gao H W, Li W Y, Li H W. Conservation tillage technology with Chinese characteristics. Transactions of the CSAM, 2003; 19(3): 1–4. (in Chinese)

Chattopadhyay P S, Pandey K P. Mechanical properties of sorghum stalk in relation to quasi-static deformation. Journal of Agricultural Engineering Research, 1999; 73(2): 199–206.

Li Y M, Qin T D, Chen J, Zhao Z. Experiments and analysis on mechanical property of corn stalk reciprocating cutting. Transactions of the CSAE, 2011; 27(1): 160–164. (in Chinese)

Wu Z Y, Gao H W, Zhang J G. Study on cutting velocity and power requirement in a maize stalk chopping process. Transactions of the CSAM, 2001; 32(2): 38–41. (in Chinese)

Baker J M, Ochsner T E, Venterea R T, Griffisb T. Tillage and soil carbon sequestration-What do we really know? Agriculture, Ecosystems and Environment, 2007; 118(1): 1–5.

Tu J P, Xu X H, Xia Z Y. The study of the cutting-blade and the optimum of the knife-array of field stalk chopper. Journal of Agricultural Mechanization Research, 2003; 2: 102–104. (in Chinese)

Dolan M S, Clappa C E, Allmarasa R R, Bakera J M, Molinab J A E. Soil organic carbon and nitrogen in a Minnesota soil as related to tillage, residue and nitrogen management. Soil and Tillage Research, 2006; 89(2): 221–231.

Yang X M, Drury C F, Reynolds W D, Tan C S. Impacts of long-term and recently imposed tillage practices on the vertical distribution of soil organic carbon. Soil and Tillage Research, 2008; 100(1): 120–124.

Lu C Y, He J, Li H W, Wang Q J, Zhang X C, Liu J A. Finite element analysis and experiment on anti-blocking device based on support cutting. Transactions of the CSAM, 2013; 44: 61–66. (in Chinese)

Lal R, Kimble J M. Conservation tillage for carbon sequestration. Nutrient Cycling in Agroecosystems, 1997; 49(1): 243–253.

West T O, Brandt C C, Wilson B S, Hellwinckel C M, Tyler D D, Marland G, et al. Estimating regional changes in soil carbon with high spatial resolution. Soil Science Society of American Journal, 2008; 72(2): 285–294.

Jam T. Effect of loading rate on mechanical characteristics of wheat and rice stalk. Bulgarian Journal of Agricultural Science, 2013; 19(6): 1452–1458.

Zhao J L, Jia H L, Guo M Z, Jiang, X M, Qu W J, Wang G. Design and experiment of supported roll-cutting anti-blocking mechanism with for no-till planter. Transactions of the CSAE, 2014; 30(10): 18–28. (in Chinese)

Ma H L, Gao H W, Wei S Y. Driven gap disc cutting mechanism for treating corn stalk and rootstalk. Transactions of the CSAE, 2006; 22(5): 86–89. (in Chinese)

Liao Q X, Gao H W, Shu C X. Present situations and prospects of anti-blocking technology of no-tillage planter. Transactions of the CSAE, 2004; 20(1): 108–120. (in Chinese)

Matin M A, Desbiolles J M A, Fielke J M. Strip-tillage using rotating straight blades: Effect of cutting edge geometry on furrow parameters. Soil and Tillage Research, 2016; 155: 271–279.

Jia H L, Zhao J L, Jiang X M, Guo M Z, Zhuang J, Qi J T, et al. Design and optimization of a double-concave rocker seedmeter for precision seeding. AMA-Agricultural Mechanization in Asia Africa and Latin America, 2015; 46(2): 29–34.

Meng H B, Han L J, Wang J C. Development of the test-bed for testing the mechanical properties of stalk materials. Transactions of the CSAE, 2005; 21(5): 77–80. (in Chinese)

Liu T H, Liang Z H, Guo J D. Experimental comparison of litchi fruit stalk cutting force. Applied Engineering in Agriculture, 2012; 28(2): 297–302.

Liao Q X, Gao H W, Shu C X. Design of sawing anti-blocking mechanism for no-tillage planter and its cutting mechanism. Transactions of the CSAE, 2003; 19(5): 60–70. (in Chinese)

Igathinathane C, Womac A R, Sokhansanj S. Corn stalk orientation effect on mechanical cutting. Biosystems Engineering, 2010; 107(2): 97–106.

Zhang S F, Song Z H, Yan Y F, Li Y D, Li F. Development and experiment of measure and control system for stalk cutting test bench. Transactions of the CSAE, 2013; 29(1): 10–17. (in Chinese)




Copyright (c)



2023-2026 Copyright IJABE Editing and Publishing Office