Determination of the draft force for different subsoiler points using discrete element method

Li Bo, Xia Rui, Liu Fanyi, Chen Jun, Han Wenting, Han Bing

Abstract


Generally, a subsoiler is comprised of a shank and a point. The point shape has a significant effect on the draft force of a subsoiler. In this study, the draft force of subsoilers with four different points were compared under the speed of 0.8 m/s and the depth of 350 mm in the soil bin. Discrete Element Method (DEM) was applied in simulating the working process of the subsoiler. The stiffness of soil particles used in DEM was calibrated by comparing the simulated draft force of a standard arc-shaped subsoiler with the experiment. The calibrated soil particle stiffness was 1.1×104 N/m. The validated model was then used to compare the draft force of subsoilers with four different points under the same condition in the test. Results showed that different points would cause different draft forces. The subsoiler with short chisel point caused the smallest draft force (2885 N) while the point with short face and wings had the largest force (4474 N). The relative errors of the simulated results were less than 4%, which proved that DEM was an effective way for predicting the draft force of subsilers. The velocity field and contact force filed could show the movement of soil around the subsoiler.
Keywords: subsoiler, point shape, draft force, chisel point, DEM, conservation tillage
DOI: 10.3965/j.ijabe.20160903.2210

Citation: Li B, Xia R, Liu F Y, Chen J, Han W T, Han B. Determination of the draft force for different subsoiler points using discrete element method. Int J Agric & Biol Eng, 2016; 9(3): 81－87.

Keywords


subsoiler, point shape, draft force, chisel point, DEM, conservation tillage

Full Text:

PDF

References


He J, Li H W, Gao H W. Subsoiling effect and economic benefit under conservation tillage mode in Northern China. Transactions of the CSAE, 2006; 22(10): 62–67. (in Chinese with English abstract)

Zhu R, Zhang J, Xue S, Yao W, Li J, Deng H. Experimentation about subsoiling technique for conservation tillage. Transactions of the CSAE, 2009; 25(6): 145–147. (in Chinese with English abstract)

He J, Li H, Wang X, McHugh A D, Li W, Gao H, Kuhn N J. The adoption of annual subsoiling as conservation tillage in dryland maize and wheat cultivation in northern China. Soil & Tillage Research, 2007; 94: 493–502.

Zhang H, Araya K, Kudoh M, Zhang C, Jia H, Liu F, et al. An explosive subsoiler for the improvement of meadow soil, part 1: thermodynamics. J. agric. Engng Res, 2000; 75: 97–105.

Makanga J T, Salokhe V M, Gee-Clough D. Effect of tine rake angle and aspect ratio on soil failure patterns in dry loam soil. Journal of Terramechanics, 1996; 33(5): 233–252.

Luo X, Shao Y, Qiu G, Wen H. The application of soil deep loosening technique in sugarcane production. Transactions of the CSAM, 1997; 28(1): 39–42. (in Chinese with English abstract)

Ahmed M H, Godwin R J. The influence of wing position on subsoiler penetration and soil disturbance. J. agric. Engng Res, 1983, 28: 489–492.

Oni K C, Clark S J, Johnson W H. The effects of design on the draught of undercutter-sweep tillage tools. Soil & Tillage Research, 1992, 22: 117–130.

Shmulevich I, Asaf Z, Rubinstein D. Interaction between soil and a wide cutting blade using the discrete element method. Soil & Tillage Research, 2007; 97: 37–50.

Godwin R J. A review of the effect of implement geometry on soil failure and implement forces. Soil & Tillage Research, 2007; 97: 331–340.

Godwin R J, O’Dogherty M L. Integrated soil tillage force prediction models. Journal of Terramechanics, 2007; 44: 3–14.

Guo Z, Tong J, Zhou Z, Ren L. Review of subsoiling techniques and their applications. Transactions of the CSAE, 2001; 17(6): 169–174. (in Chinese with English abstract)

Mouazen A M, Neményi M. Finite element analysis of

subsoiler cutting in non-homogeneous sandy loam soil. Soil & Tillage Research, 1999; 51: 1–15.

Mouazen A M, Neményi M. Tillage tool design by the finite element method: part 1. finiteelement modelling of soil plastic behavior. J. Agric. Engng Res, 1999; 72: 37–51.

Mouazen A M, Neményi M, Schwanghart H, Rempfer M. Tillage tool design by the finite element method: part 2. Experimental validation of the finite element results with soil bin test. J. Agric. Engng Res, 1999; 72: 53–58.

Mouazen A M, Ramon H. A numerical-statistical hybrid modelling scheme for evaluation of draught requirements of a subsoiler cutting a sandy loam soil, as affected by moisture content, bulk density and depth. Soil & Tillage Research, 2002; 63: 155–165.

Mak J, Chen Y, Sadek M A. Determining parameters of a discrete element model for soil–tool interaction. Soil & Tillage Research, 2012, 118: 117–122.

Tamás K., Jóri I J, Mouazen A M. Modelling soil–sweep interaction with discrete element method. Soil & Tillage Research, 2013; 134: 223–231.

Ucgul M, Fielke J M, Saunders C. 3D DEM tillage simulation: Validation of a hysteretic spring (plastic) contact model for a sweep tool operating in a cohesionless soil. Soil & Tillage Research, 2014; 144: 220–227.

Zhang R, Chen B, Li J, Xu S. DEM Simulation of Clod Crushing by Bionic Bulldozing Plate. Journal of Bionic Engineering Suppl. , 2008, 72–78.

Chen Y, Munkholm L J, Nyord T. A discrete element model for soil-sweep interaction in three different soils. Soil & Tillage Research, 2013; 126: 34–41.

Shmulevich I. State of the art modeling of soil–tillage interaction using discrete element method. Soil & Tillage Research, 2010; 111: 41–53.

Itasca, PFC3D particle flow code in three dimensions, theory and background. Itasca Consulting Group, Inc., Minneapolis, MN, USA. 2008.

Sadek M A, Chen Y. Microproperties calibration of discrete element models for soil-tool interaction. ASABE/CSBE Paper No. 1911030. St Joseph, MI, USA: ASABE. 2014.

Li B, Liu F, Xia R, Chen J. Distinct element method analysis and experiment of a biomimetic subsoiler. International Agricultural Engineering Journal, 2015; 24(1): 47–54.

Van der Linde, J., Discrete element modeling of a vibratory subsoiler. MSc Thesis. Department of Mechanical and Mechatronic Engineering, University of Stellenbosch, Matieland, South Africa. 2007.

JB/T 9788-1999. Subsoiler and share shaft. Machinery industry standard of the people’s Republic of China. (in Chinese)




Copyright (c)



2023-2026 Copyright IJABE Editing and Publishing Office